cancel
Showing results for 
Search instead for 
Did you mean: 
1

Ask

2

Reply

3

Solution

Asus DSL-N55U & V3

jtsr
2: Seeker
2: Seeker

I have just upgrade from a V2 to a V3.

 

Plugged in the V3 and DHCP on my Asus DSL-N55U picked it up and tried to assign it an IP address however the VSS would appears not to be accepting it, DHCP is logging that its constantly trying to give it an IP.

 

I then manually assigned the IP to the MAC address and the errors stopped however I am still getting

 

Flashing Power Light and Solid Amber In Use Light.

 

I have NAT open and UPNP enabled.

 

I have manually configured the port forwarding.

 

I have waited 48 hours now and still the same issue.

 

It is registered correctly on MyAccount.

 

I have tried to perform a factory reset however it does not do anything when I hold the reset button down for more than 30 seconds.

 

The device is registered to the showhome postcode as we are on a new development and our postcode is not being accepted.

 

Any help appreciated.

 

VSS Serial Number: 40124242724

 

Thanks.

 

1 ACCEPTED SOLUTION

Right,

 

Update:

 

I have performed a router reboot while the SS was off after a hard reset.

 

I have changed the cable from the issued white cable to a Cat 6 cable.

 

I then turned on the SS and now its showing some different lights. 

 

I would suggest you upgrade the quality of the ethernet cables you send out!!!!!

View solution in original position

10 REPLIES 10

I can confirm its now working.

 

I new cable between SS and router resolved the issues.

 

Please upgrade the quality of the included cable.