Support:

Vodafone Sure Signal

Search in eForum:
Reply
Occasional Poster
susiebwilk
Posts: 13
Registered: ‎01-09-2010

Re: Sure Signal - "Call Failed" error when making Outbound calls

40112549585
Message 321 of 547 (7,258 Views)
Occasional Poster
mfin
Posts: 7
Registered: ‎21-10-2011

Re: Sure Signal - "Call Failed" error when making Outbound calls

Ah, so I assume my firmware is as good as it will get and thats that.

 

Im not getting Call Failed much now, although the internet does vary between fine and appalling, even though my broadband continues to run like a rocket regardless.

 

Mark

Message 322 of 547 (7,244 Views)
Moderator (Retired)
Trev
Posts: 3,706
Registered: ‎04-05-2010

Re: Sure Signal - "Call Failed" error when making Outbound calls

Hi all.

 

susiebwilk – I’m not sure what you issue is as such?? I’ve checked your VSS unit and it all seems to working well. What is the issue you’re having and what light sequence have you got?

 

mfin – when it come to making calls and call quality the important stat is the upload speed not download. If you’ve got an upload speed of 0.3 Mbps or lower it will cause issues with your outbound calling.

 

Trev

Message 323 of 547 (7,223 Views)
Occasional Poster
susiebwilk
Posts: 13
Registered: ‎01-09-2010

Re: Sure Signal - "Call Failed" error when making Outbound calls

The system light and power light is on. Neither is flashing.

I get call failed yet can receive calls and send texts. I have had this problem at least twice before and each time it takes a very long time to get it fixed which is not made any easier by the fact the help desk don't seem to know how to address these calls. I would like to know if Vodafone has a process for handling these calls which does not involve me being treated like an idiot and asked to phone people on a phone I can't use. Perhaps I can take this matter up with someone senior wo is capable of putting a sensile support plan together so that calls can be routed through the help desk to you guys, who actually have some idea of the problems.
Message 324 of 547 (7,209 Views)
Occasional Poster
susiebwilk
Posts: 13
Registered: ‎01-09-2010

Re: Sure Signal - "Call Failed" error when making Outbound calls

[ Edited ]

Whatever you have done to fix it only ever seems temporary. Here is a transcript of one previous problem which was fixed after I finally found someone on here who could help.




From: susiebwilk@
To: garry.swain@
Subject: FW: No Subject [#7012814]
Date: Tue, 18 Oct 2011 21:04:36 +0100


FYI
From: susiebwilk@
To: customer.care@help.vodafone.co.uk
Subject: RE: No Subject [#7012814]
Date: Thu, 28 Jul 2011 15:07:00 +0100

Dear Rahul,

Please find below a selection of emails from your colleagues at Vodafone relating this reocurring issue. I am not happy that this has happened again. We are paying for a service that we are not getting full use of and i seem to be being fobbed off with an excuse each time.

Please read the correspondance below and pass this on to whoever can fix it, bearing in mind that i want a full explaination as to WHY this has happened again. I will also be asking for compensation over this matter. If i do not receive a satisfactory answer then i will be making an official complaint. I have asked you to raise this issue previously but i do not feel that you are taking the necessary steps to prevent your customers from suffering a loss of service.

Kind regards,

Sue Wilkins

03/09/10
Hi Susan,
I've taken a look into your issue and can see that it's caused by a mis-match between the Sure Signal system and the Mobile Switching Centre which handles your calls. In order to rectify this I've raised a case to our support teams.
As soon as they've made the necessary changes, you'll need to perform a factory reset on your Sure Signal to ensure it re-syncs with the system. I'll email you to let you know when to do this.
George
eForum Team


13/09/10
Good afternoon Sue

Thanks for your email, I have now forwarded your issue to our network team so the SAC can be changed from 14623 (not on the data base) to 18073 (on the database).
Please note that the current turn around time is up to 5 days, however I will be able to notify you as soon as this has been done.
Thanks
Reidar


21/09/10
Hi Sue,
Thank you for your email. As Reidar isn't in the office, I've taken a look into this for you. Having checked our Sure Signal admin system, it looks like the SAC change has been actioned which should fix your issue.
To ensure that your Sure Signal is synced up with the system correctly, you'll just need to perform a factory reset as follows:
-Hold down the reset button and unplug the power cable
-Wait roughly 10 seconds with the button still held down
-Plug the cable back in and then release the button when the lights come on
If you require any further assistance then don't hesitate to ask.
07/04/11

Hi Susan,
Thank you for your email. I've checked on this for you and can see that the SAC information for your Sure Signal is incorrect. As such, I've raised a case to our support team for this to be rectified.
Once the change has been made, you'll just need to perform a factory reset to ensure your Sure Signal re-syncs with the server. I'll email you to advise when to do this.
Kind Regards,
George
eForum Team
15/04/11

Hi Susan,
I've had word back from our support team that the necessary changes have been made to resolve your outgoing calls issue.
In order to ensure your Sure Signal syncs with the server correctly, please perform a factory reset as follows:
-Hold down the reset button and unplug the power cable
-Keep the button held down and wait 10 seconds
-Plug the cable back in and then release the button once the lights come back on
If you do need any further assistance, then don't hesitate to ask.
George
eForum Team


16/04/11

 
Hi Sue,
Thanks for your email back here.
I'm not sure that exactly happened here as faults sometimes occur, however as George has mentioned, the necessary steps have now been taken to resolve the issue.
I'm afraid I wouldn't be able to offer any compensation for this as the rest of our mobile network was in full working order, meaning you could still use your phone in other locations.
Thanks
Wayne




Hi Sue,
Thanks for your email.
I can assure you that I am not trying to pretend that nothing happened. There was a fault, which we fixed. As I mentioned in my last email, sometimes faults happen, even if nothing is changed things can go wrong. We have now fixed this issue and things are now back up and running for you.
I'm sure you will not have any further issues
Thanks
Wayne
 


Date: Thu, 28 Jul 2011 12:18:53 +0000
From: customer.care@help.vodafone.co.uk
To: susiebwilk@
Subject: RE: No Subject [#7012814]


Hello Sue,
Thank you for contacting Vodafone customer support with regard to Suresignal problem.
I recommend you to visit the nearest Vodafone so that they can check the device and provide you with the appropriate solution.
Alternatively, you can call the Vodafone sure signal team as they would be the best contact person to resolve your query.
Please call them on 08454 402104.
I trust this helps.
Regards,                
 
Rahul (surname removed for security)                            
Vodafone Customer Services
 

Message 325 of 547 (7,208 Views)
Moderator (Retired)
Trev
Posts: 3,706
Registered: ‎04-05-2010

Re: Sure Signal - "Call Failed" error when making Outbound calls

Hi susiebwilk.

 

You are again connected to the incorrect SAC (Service Area Code) and it's this that will be affecting your outgoing calls. I already have your details, so I have raised this with our engineers to be rectified.

 

As soon as this is resolved I will contact you immediately.

 

Trev

Message 326 of 547 (7,202 Views)
Occasional Poster
susiebwilk
Posts: 13
Registered: ‎01-09-2010

Re: Sure Signal - "Call Failed" error when making Outbound calls

How many more times is this going to happen?

Since this is a repeating incident, it is a problem. When will it be fixed properly?
Message 327 of 547 (7,194 Views)
Occasional Poster
susiebwilk
Posts: 13
Registered: ‎01-09-2010

Re: Sure Signal - "Call Failed" error when making Outbound calls

Any news on when this will be done, please?
Message 328 of 547 (7,117 Views)
Moderator (Retired)
Trev
Posts: 3,706
Registered: ‎04-05-2010

Re: Sure Signal - "Call Failed" error when making Outbound calls

Hi susiebwilk.

 

The SAC has now been updated correctly.

 

Can you now please factory reset your device as shown below:

 

  • Hold down the reset button until all the lights show (about 30 seconds)
  • Keeping the reset button held down, remove then re-insert the power lead.
  • Once all lights display release the reset button.
  • The Sure Signal will come online in around 1 hour.

Let me know if you've still any issues.

 

Trev

Message 329 of 547 (7,096 Views)
Occasional Poster
susiebwilk
Posts: 13
Registered: ‎01-09-2010

Re: Sure Signal - "Call Failed" error when making Outbound calls

Still no joy, I'm afraid. Any ideas?
Message 330 of 547 (6,985 Views)
Tech Team
Wayne
Posts: 14,308
Registered: ‎04-08-2008

Re: Sure Signal - "Call Failed" error when making Outbound calls

Hi susiebwilk

 

Thanks for letting us know, I’m sorry to hear that this still isn’t sorted for you. I’ll have a word with George (Our resident Sure Signal expert) and get this chased for you.

 

Either myself or George will get back to you as soon as possible.

 

Thanks

 

Wayne

Message 331 of 547 (6,904 Views)
Occasional Poster
susiebwilk
Posts: 13
Registered: ‎01-09-2010

Re: Sure Signal - "Call Failed" error when making Outbound calls

Any news? This is taking a ridiculous amount of time to get resolved.
Message 332 of 547 (6,788 Views)
Tech Team
Tech Team
Lee
Posts: 17,199
Registered: ‎27-10-2008

Re: Sure Signal - "Call Failed" error when making Outbound calls

Hi there susiebwilk,

 

Thanks for chasing this up.

 

I've requested for the SAC to be changed yet again. I expect to have an answer for you as soon as possible.

 

Cheers,

 

Lee

Message 333 of 547 (6,772 Views)
Occasional Poster
susiebwilk
Posts: 13
Registered: ‎01-09-2010

Re: Sure Signal - "Call Failed" error when making Outbound calls

Hurray! Finally! It works! Merry Christmas! Deck the halls! Now, what do I need to in order to able to get the SAC changed instantly the next time it fails? Is there a proper procedure for this, and if not who do I need to write to? Thanks S.
Message 334 of 547 (6,761 Views)
Occasional Poster
simecircle
Posts: 6
Registered: ‎21-02-2012

Re: Sure Signal - "Call Failed" error when making Outbound calls

I have been suffering from this probelm for a few days now. I have gone through all of the troubeshooting on the first page with no success. I have tried to use the contact form, but this is broken! Please can one of the Vodafone peopel on here help me resolve this.

Message 335 of 547 (6,410 Views)
Tech Team
Tech Team
Lee
Posts: 17,199
Registered: ‎27-10-2008

Re: Sure Signal - "Call Failed" error when making Outbound calls

Hello simecircle,

 

Thanks for your post. Sure we can help!

 

If the Contact Us link isn't working then please see my private message and follow the details on how to get in touch :smileywink:

 

Your PM Inbox can be accessed at the provided link.

 

In the meantime, could you let us know your VSS serial number please?

 

Cheers,

 

Lee

Message 336 of 547 (6,381 Views)
Scout I
dannyboy1121
Posts: 49
Registered: ‎04-11-2010

Re: Sure Signal - "Call Failed" error when making Outbound calls

Hello - I can take inbound calls and sms etc ... but no outbound calls via Sure Signal (congested error). I've reset / power cycled the Sure Signal - all lights are working as normal.

I'm sure it's a SAC issue. I kept getting texts that I needed to update my postcode in my account - but the information set was correct. I couldn't work out why I was getting them.

Can someone PM me with a way to get this fixed please.
Message 337 of 547 (6,292 Views)
Occasional Poster
reggiesamuel
Posts: 2
Registered: ‎03-03-2012

Re: Sure Signal - "Call Failed" error when making Outbound calls

Sure signal (new version) > Apple Airport Extreme > Cable Modem > Virgin Media 50Mbps

 

Internet working fine on all other clients on LAN.

Sure signal light sequence looks OK - solid red light, solid status light.

 

Iphone has full 3G signal when sure signal is on.

Outgoing call on iphone = call failed.

Outgoing SMS/iMessage = OK

Incoming call on iphone = OK

Incoming SMS/iMessage = OK

 

Apple Airport Extreme configured for inbound and outbound port forwarding for UDP and TCP:

8, 50, 123, 500, 4500

 

The primary purpose of purchasing the sure signal device was to obtain a strong signal within this office for outgoing calls.

At present the sure signal device is not working.

 

This is possibly a EFT135 Sure Signal SAC Issue.

Sure signal serial number = 40120104415

Please can you assist?

 

thanks Reggie

 

 

 

Message 338 of 547 (8,585 Views)
Tech Team
James
Posts: 18,106
Registered: ‎21-07-2008

Re: Sure Signal - "Call Failed" error when making Outbound calls

Hi dannyboy1121, reggiesamuel,

 

I have sent you both a PM so we can investigate your issues further.

 

Please follow the instructions on the PM and one of our team will be able to pick this up for us.

 

You can find your PM inbox here.

 

James

 

Message 339 of 547 (8,582 Views)
Occasional Poster
ksamtani
Posts: 3
Registered: ‎01-03-2012

Re: Sure Signal - "Call Failed" error when making Outbound calls

Hi James,

 

I am having the same problem as the customer above. Please could you PM me details of how to get this sorted. I am very fustrated now by the lack of help with the call centre service staff. I have even provided with a replacement.

Message 340 of 547 (8,570 Views)