Support:

Vodafone Sure Signal

Search in eForum:
Reply
Peer I
garitchie
Posts: 8
Registered: ‎10-04-2012
Accepted Solution

New Sure Signal - Power light only on (after phone and system lights flash for a few minutes).

Hi,

Purchased sure signal yesterday and it is still not working. Waited 24 hours with no luck. I have done the following:

 

1/ Unit registered and confirmed ok. Waited 24 hours, no activity.

2/ Set up the port forwarding as instructed in your help file.

3/ Reset the modem ( I have internet access) then reset the Sure Signal unit to the factory defaults

4/ Checked latency to your server (completed hops in max 20ms)

5/ Phone and system lights flash and then go out until it has another attempt some time later.

6/ DHCP and UPnP are both enabled on this modem router and so I dont really understand why I need to set up port forwarding anyway? 

 

My Kit:

Sure (or not so sure) signal  V2 serial number: 40120954157

Modem Router: Belkin ADSL Modem Router F5D9630uk4A 

 

I see generally that there seems to be many issues with these units, all of my other equipment requiring internet access is pretty much "plug and play", like many of your customers I dont understand why we have so many problems I do understand the technology is complex but the integration of new units should be seemless.

 

Looking forward to a speedy solution to this problem.

 

Regards,

 

George Ritchie.

Message 1 of 16 (3,705 Views)
Administrator
Matt
Posts: 14,633
Registered: ‎15-09-2009

Re: New Sure Signal - Power light only on (after phone and system lights flash for a few minutes).

Hi

Can you take a look at our Sure Signal Troubleshooting thread, and then post back your results if you’re not directed to an existing thread?

Thanks

Matt

Moderator
eForum Team

Message 2 of 16 (3,701 Views)
Peer I
garitchie
Posts: 8
Registered: ‎10-04-2012

Re: New Sure Signal - Power light only on (after phone and system lights flash for a few minutes).

Hi,

I have already looked at your troubleshooting thread and the results are as shown in my first post entry. What additional information do you require please?

 

Regards,

 

George Ritchie.

 

 

Message 3 of 16 (3,692 Views)
Peer I
garitchie
Posts: 8
Registered: ‎10-04-2012

Re: New Sure Signal - Power light only on (after phone and system lights flash for a few minutes).

Hi

Any response to this post please from the tech team, or it is going back to the shop for a refund as being unfit for purpose..

 

Regards,

 

George Ritchie.

Message 4 of 16 (3,663 Views)
Tech Team
Simon
Posts: 5,947
Registered: ‎10-01-2011

Re: New Sure Signal - Power light only on (after phone and system lights flash for a few minutes).

Hi garitchie

 

Thanks for your post with the details of what already has been tried. 

 

I've forced a resync of your Sure Signal this afternoon. If you could perform a factory reset of your device at the earliest opportunity this may help resolve the issue.

 

Also, please could you post your IP address so that we can check this against the white list?

 

Thanks

 

Simon

Message 5 of 16 (3,644 Views)
Peer I
garitchie
Posts: 8
Registered: ‎10-04-2012

Re: New Sure Signal - Power light only on (after phone and system lights flash for a few minutes).

Hi Simon,

Thanks for the response, the resync seemed to do the trick and I am now connected. For reference my ip address is 2.99.42.84 and is I believe dynamic.

 

In addition, I am upgrading my internet to High Speed Fibre Optic (40 meg) next week and so I hope I have success with sure signal integrating with that. Maybe another resync required at that time?

 

Regards,

 

GaRitchie

Message 6 of 16 (3,634 Views)
Tech Team
Tech Team
Lee
Posts: 17,199
Registered: ‎27-10-2008

Re: New Sure Signal - Power light only on (after phone and system lights flash for a few minutes).

Hey garitchie,

 

Fantastic news! Thanks for updating the thread. You can leave Simon feedback if you wish - eForum Survey.

 

The move should be seamless if you're staying with your current provider. If you're switching then the VSS may well request a location change. If this happens, simply log in to your Sure Signal dashboard and resubmit your location and you should be fine.

 

Do let us know if you need any further assistance.

 

Cheers,

 

Lee

Message 7 of 16 (3,614 Views)
Peer I
garitchie
Posts: 8
Registered: ‎10-04-2012

Re: New Sure Signal - Power light only on (after phone and system lights flash for a few minutes).

Thanks, went to leave feedback on your survey pages but I get an error which reads "the website has declined to show this page", I am logged in?

Message 8 of 16 (3,601 Views)
Moderator (Retired)
Andy
Posts: 20,669
Registered: ‎25-11-2010

Re: New Sure Signal - Power light only on (after phone and system lights flash for a few minutes).

Hi garitchie,

 

Thanks for the update. It's something we've been made aware of and are currently looking into.

 

Thanks

 

Andy

Moderator

Message 9 of 16 (3,594 Views)
Occasional Poster
petejf
Posts: 6
Registered: ‎23-04-2012

Re: New Sure Signal - Power light only on (after phone and system lights flash for a few minutes).

Hi,sorry to hijack the thread, but  I have the same issue on my father in law's sure signal.

 

No matter what I have done I still end up with the same issue. therefore I fell it needs a re-sync

 

I have set udp/tcp settings on BT Home hub for 50, 500, 7123 (or 1723 - cant recall), 123, 4500 and 8.

 

I have also set upnp to yes and VPN 500 to yes.

 

Following this I have also check by broadband speed etc and have 8.3MB donwload, 0.43mb upload and 42ms ping If I recall correctly which according to the forum should be sufficient.

 

Running a traceroute to the IP address proposed in another thread I get a failure with timeout errors.

 

I have the IP address and serial number of the device that I can send to anyone who is able to re-sync etc.

 

thanks

 

Pete

Message 10 of 16 (3,346 Views)
Peer I
garitchie
Posts: 8
Registered: ‎10-04-2012

Re: New Sure Signal - Power light only on (after phone and system lights flash for a few minutes).

Hi, The resync cured my problems and suresignal has been performing well (including an upgrade to high speed optical modem).

The only other factor I have noticed is that it does seem very bandwidth hungry. My 24meg link (nominal 14 meg) was only running at around 4 meg with Sure Signal. My 40 meg optical link (nominal 38 meg) is running at 22 meg with sure signal.  

Message 11 of 16 (3,318 Views)
Moderator (Retired)
DaveCD
Posts: 4,266
Registered: ‎26-07-2011

Re: New Sure Signal - Power light only on (after phone and system lights flash for a few minutes).

Hi petejf

 

I’d like to help to resolve this VSS (Vodafone Sure Signal) issue for you, but to do this I will need to take some further information from you.

 

Can you post the following results to this thread?

 

 Speedtest and Pingtest.

 

Your IP address.

 

Traceroute.

 

  • On a PC / Laptop :
  • Click on Start  and select Run
  • Type CMD into the Run box and press enter/click ok
  • A black box will appear.
  • In this box type tracert 212.183.133.177    press Enter
  • Paste the output of this command into your reply.

 

And finally, your VSS serial number.

 

Many Thanks

 

DaveCD

eForum Team

Message 12 of 16 (3,269 Views)
Occasional Poster
petejf
Posts: 6
Registered: ‎23-04-2012

Re: New Sure Signal - Power light only on (after phone and system lights flash for a few minutes).

Hi, My VSS serial number is 40114258524 and IP address of 81.151.10.244

 

Speed test when run previously was 8.3MB down, 0.43MB up , and 42ms ping

 

Unfortunately the VSS is in my In laws house so I cannot get a traceroute running to send - I can arrange for the unit to be reset and re-powered etc but running a traceroute again will be difficult ( I have run before and saw many timeouts on the traceroute ( but annoyingly did not capture the failure)

 

thanks for any help you can provide

 

Message 13 of 16 (3,265 Views)
Tech Team
Tech Team
Lee
Posts: 17,199
Registered: ‎27-10-2008

Re: New Sure Signal - Power light only on (after phone and system lights flash for a few minutes).

Hi there petejf,

 

Thanks for your post about your VSS (Sure Signal).

 

I've checked the serial number and can see it connected to our servers this morning at 01:46. If the issue is ongoing, please could you factory reset it for me following my forced resync?

 

VSS Factory Reset


  • Hold the reset button till all the lights come on or flash (about 30 seconds)
  • Keeping the rest button held, remove and re-insert the power lead
  • Once all the lights come on or flash, release the reset button
  • The VSS should come online within the hour

Let me know how you get on.

 

Cheers,

 

Lee

Message 14 of 16 (3,217 Views)
Occasional Poster
petejf
Posts: 6
Registered: ‎23-04-2012

Re: New Sure Signal - Power light only on (after phone and system lights flash for a few minutes).

OK thanks will give it a go and let you know how I get on

Message 15 of 16 (3,189 Views)
Occasional Poster
petejf
Posts: 6
Registered: ‎23-04-2012

Re: New Sure Signal - Power light only on (after phone and system lights flash for a few minutes).

Hi, reset done and all working great now

 

thanks alot for your help

 

Pete

Message 16 of 16 (3,128 Views)