- Mark Topic as New
- Mark Topic as Read
- Float this Topic to the Top
- Bookmark
- Subscribe
- Printer Friendly Page
15-02-2012 06:27 PM
No signal from Sure Signal
- Mark as New
- Bookmark
- Subscribe
- Highlight
- Email to a Friend
- Report inappropriate content
Hi, following a power cut I have had no signal from my Sure Signal. The power light is on and light two is flashing. I have worked trough the troubleshooting thread 'Sure Signal - Light 1 On, Light 2 Flashing' but to no avail. The Sure Signal had worked fine for around two years prior to that, and I had made no changes to router settings. Any advice would be very much appreciated.
Thanks
Steve
Serial Number: 21197155449
16-02-2012 07:54 PM
Re: No signal from Sure Signal
- Mark as New
- Bookmark
- Subscribe
- Highlight
- Email to a Friend
- Report inappropriate content
Hi there trebligs,
Thanks for your post.
I've checked and your VSS connected to our servers this morning at 03:13. There was a flag for a resync which was probably to do with the power cut you suffered so I've forced that for you.
If you are still encountering problems then please reboot your router and reset the VSS as per the instructions below and we should see you back online.
- Hold the reset button till all the lights come on or flash (about 30 seconds)
- Keeping the reset button held, remove and re-insert the power lead
- Once all the lights come back on or flash, release the reset button
- The VSS will come online within the hour
Let me know if you need any further help.
Cheers,
Lee
17-02-2012 07:21 PM
Re: No signal from Sure Signal
- Mark as New
- Bookmark
- Subscribe
- Highlight
- Email to a Friend
- Report inappropriate content
Thanks for your reply.
I've tried rebooting my router and resetting my Sure Signal however I've still got the first light on and the second light flashing.
Steve
19-02-2012 11:31 AM
Re: No signal from Sure Signal
- Mark as New
- Bookmark
- Subscribe
- Highlight
- Email to a Friend
- Report inappropriate content
26-02-2012 12:15 PM
Re: No signal from Sure Signal
- Mark as New
- Bookmark
- Subscribe
- Highlight
- Email to a Friend
- Report inappropriate content
I've tried the rebooting and resetting procedure several times over the last week but have had no success. I'm still stuck with light one on and light two flashing.
Steve
29-02-2012 08:33 AM
Re: No signal from Sure Signal
- Mark as New
- Bookmark
- Subscribe
- Highlight
- Email to a Friend
- Report inappropriate content
Hi trebligs,
Can you confirm if you are still having this issue?
If yes, pleas take a look at the PM that I have sent you and follow the instructions it contains so that one of our team can look into this further for you.
You can find your PM inbox here.
James







