cancel
Showing results for 
Search instead for 
Did you mean: 
1

Ask

2

Reply

3

Solution

No sure signal after power cut again.

rudshers
2: Seeker
2: Seeker
Hi I posted a while ago as we had a power cut then our signal stopped. This has happened again, any help appreciated.

Many thanks
2 REPLIES 2

Retired-Matt_Vo
Moderator (Retired)
Moderator (Retired)

Hi

Please take a look at our Sure Signal Troubleshooting thread. If this doesn’t resolve your query, please post your reply either below, or in the relevant thread, together with the details requested, including the following information.

Your speed test results from here.

Your ping test results from here.

Your external IP address from here.

The results of a traceroute.

 

Your Sure Signal serial number:

 


VSS Traceroute command

On a PC:

Click on Start and select Run

Type CMD into the Run box and press enter/click ok

A black box will appear.

In this box type tracert 212.183.133.177 press Enter

Paste the output of this command into your reply.

This will help us get the quickest possible resolution for you.

Thanks

Matt
Moderator

Retired-Andy
Moderator (Retired)
Moderator (Retired)

Hi rudshers,

 

I’ve resynced your Sure Signal for you.

 

So that the resync completes, can you do a factory reset for me:-

 

  • Hold down the reset button until all the lights show/flash (about 30 seconds)
  • Keeping the reset button held down, remove both the Ethernet cable and power lead
  • Re-insert the power lead
  • Once all the lights display, release the reset button
  • The Sure Signal will come online in about an hour
  • When the Sure Signal is back online, re-insert the Ethernet cable.

 

Let me know how you go on.

 

Thanks,

 

Andrew