Support:

Vodafone Sure Signal

Search in eForum:
Reply
Occasional Poster
Simon1986
Posts: 2
Registered: ‎24-06-2011

Re: New Sure Signal - Steady Power Light Only

Hi matt I have gone through all what I could see but I aint the best when it comes to all the technical stuff :smileyindifferent: I noticed it says for me to add my router make and my ss s-number and my ISP so here goes please help if you can

 

NETGEAR dgn2000

ss s/number 40110511363

ISP Karroo / KC (Kingston upon hull)

 

cheers

Message 141 of 2,100 (12,959 Views)
Occasional Poster
mbrock
Posts: 2
Registered: ‎23-06-2011

Re: New Sure Signal - Steady Power Light Only

Thanks for your help - the resync didn't help but I did the factory reset and it seems to be working fine now.  Good job, so my wife can play with her brand new Galaxy S2!

 

Thanks again,

 

Mark

Message 142 of 2,100 (12,946 Views)
Moderator (Retired)
BenJ
Posts: 3,428
Registered: ‎13-01-2010

Re: New Sure Signal - Steady Power Light Only

Hi Ridecraft

Appologies,  I would recommend as a test powering down your router and sure signal. disconnecting all PC devices from the router and powering the router back up with just the Sure signal attached (and powered up)  once this has come up I would then connect a PC to the Router and test the internet connection by performing the following on a PC :
 

  • Click on Start  and select Run.
  • Type CMD into the Run box and press enter/click ok.
  • A black box will appear.
  • In this box type tracert 212.183.133.177 press Enter.
  • Paste the output of this command into your reply  along with a copy of the results from running a speed test.  

Thanks
BenJ
eForum Team 

Message 143 of 2,100 (12,934 Views)
Moderator (Retired)
BenJ
Posts: 3,428
Registered: ‎13-01-2010

Re: New Sure Signal - Steady Power Light Only

Hi Simon1986

 I've just resynced your Sure Signal for you, 


.  This has completed successfully so I would suggest performing a factory reset on the Sure Signal box

To factory reset the Sure Signal box:

  • Hold down the reset button until all the lights show (about 30 seconds) keeping the reset button held down.
  •  Remove then re-insert the power lead.
  • Once all lights display release the reset button. The Sure Signal will come online in around 1 hour.

If resynching the Sure Signal box doesn’t work, then this would indicate that your Sure Signal cannot negotiate a connection to the Vodafone server via your broadband connection.

I would recommend as a test powering down your router and sure signal. disconnecting all PC devices from the router and powering the router back up with just the Sure signal attached (and powered up)  once this has come up I would then connect a PC to the Router and test the internet connection by performing the following on a PC :

 

  • Click on Start  and select Run
  • Type CMD into the Run box and press enter/click ok
  • A black box will appear.
  • In this box type tracert 212.183.133.177    press Enter
  • Paste the output of this command into your reply  along with a copy of the results from running a speed test

Hi mbrock

 

Thats great news! let me know if you have any further issues.

Thanks
BenJ
eForum Team

 

Message 144 of 2,100 (12,932 Views)
First Poster
richardd
Posts: 1
Registered: ‎30-06-2011

Re: New Sure Signal - Steady Power Light Only

[ Edited ]

Hi voda team

 

Would appreciate some support - flashing system light for 10 mins or so then just solid power light.

 

VSS Serial no 40111056160

 

Tried factory reset - VSS is in DMZ, all ports as necessary forwarded to the VSS and it is picking up DHCP address from my router (Draytek 2820) - believe it to be a routing problem to your network as per traceroute below.

 

Tracing route to host212-183-133-177.uk.access.vodafone.net [212.183.133.177]
over a maximum of 30 hops:

  1    <1 ms    <1 ms    <1 ms  my.router [192.168.99.1]
  2    12 ms    11 ms    11 ms  lns17.inx.dsl.enta.net [188.39.1.26]
  3    12 ms    12 ms    11 ms  gi1-7.inx.dist.dsl.enta.net [188.39.1.25]
  4    11 ms    11 ms    11 ms  te2-2.interxion.dsl.enta.net [78.33.141.89]
  5    12 ms    12 ms    12 ms  te2-3.interxion.core.enta.net [87.127.236.209]
  6    12 ms    12 ms    13 ms  te5-1.telehouse-metro.core.enta.net [87.127.236.
94]
  7    12 ms    12 ms    12 ms  te3-3.telecity-hex.core.enta.net [87.127.236.106
]
  8    12 ms    21 ms    12 ms  TenGigabitEthernet8-1.ar6.LON3.gblx.net [64.214.
147.1]
  9    23 ms     *       23 ms  VODAFONE-LTD.TenGigabitEthernet7-1.ar6.LON3.gblx
.net [64.214.144.122]
 10     *        *        *     Request timed out.
 11     *        *        *     Request timed out.

 

Many thanks,

Rich

Message 145 of 2,100 (12,911 Views)
Occasional Poster
vchaney
Posts: 13
Registered: ‎23-05-2011

Re: New Sure Signal - Steady Power Light Only

[ Edited ]

HI guys,

I was having trouble with my old version SS and have jsut received the new one as a replacement. However, the problem has not been resolved. The box has been registered correctly (Serial 40111617342).

I've connected my laptop to the pass through ethernet port and get the following traceroute:

Traceroute has started… traceroute to 212.183.133.177 (212.183.133.177), 64 hops max, 52 byte packets

1 192.168.2.1 (192.168.2.1) 1.045 ms 0.848 ms 0.629 ms
2 losubs.subs.dsl1.mbr-roch.zen.net.uk (62.3.82.17) 26.153 ms 26.310 ms 27.801 ms
3 ae0-136.cr1.mbr-roch.zen.net.uk (62.3.80.137) 26.043 ms 34.553 ms 26.140 ms
4 ae2-0.cr1.kp-leeds.zen.net.uk (62.3.80.70) 27.062 ms 27.084 ms 35.029 ms
5 ge-3-1-0-0.cr2.kp-leeds.zen.net.uk (62.3.80.74) 34.924 ms 26.160 ms 27.853 ms
6 ge-3-0-0-0.cr1.th-lon.zen.net.uk (62.3.80.78) 33.213 ms 32.620 ms 31.199 ms
7 sl-gw23-lon-11-1-0.sprintlink.net (82.195.189.65) 33.032 ms 31.671 ms 32.709 ms
8 sl-bb23-lon-9-0-0.sprintlink.net (213.206.128.62) 32.208 ms 32.280 ms 32.091 ms
9 sl-bb20-lon-3-0-0.sprintlink.net (213.206.129.150) 33.481 ms 32.733 ms 33.345 ms
10 213.206.131.26 (213.206.131.26) 32.413 ms 34.041 ms 33.612 ms
11 vodafone-ltd.tengigabitethernet7-1.ar6.lon3.gblx.net (64.214.144.122) 43.484 ms 43.386 ms 43.958 ms

On speedtest I'm getting a ping of 47ms, download of 6.3MB and upload of 0.27MB

These are better speeds than I was getting when the box was working.

I've also checked that the box is getting an IP address; it is, and I can ping it.

My external IP is 82.69.81.49 and both LAN lights work on the back of the box.


The only thing that has changed with my ISP is the IP address. Is there any way you can check that this IP address works?

Ports are forwarded as suggested and the SS is set up as the DMZ to catch all other traffic.

Many thanks,

Vince

Message 146 of 2,100 (12,863 Views)
Guide II
FelixDaHousecat
Posts: 406
Registered: ‎07-12-2010

Re: New Sure Signal - Steady Power Light Only

upload looks slow, you need minimum .33ms I think.

 

also, what lights are showing on the ss?

how long have you had it?

 

FDH

Message 147 of 2,100 (12,858 Views)
Occasional Poster
vchaney
Posts: 13
Registered: ‎23-05-2011

Re: New Sure Signal - Steady Power Light Only

I've had the old SS working on less than these speeds. There is more detail in the threads on the old SS thread. Only the power light is showing (hence I posted on this thread). The box has been registered for about 5 hours now. TBH the reason for the early post is that I dont believe the issue to be with the box, I think there is an issue with the location and static ip I had assigned to me. The router setup is identical to my old O2 set up and it's on a BT access wholesale line, so the speeds are broadly consistent. I'm now with Zen and there are other users who have this working through them.

Thanks for you help.
Message 148 of 2,100 (12,853 Views)
Occasional Poster
EMWood
Posts: 7
Registered: ‎01-06-2011

Re: New Sure Signal - Steady Power Light Only

Hi Lee

 

Sorry for the delay in responding but the reset did not work.   I have been onto my firm's broadband provider and have worked through the port forwarding configuration with them to ensure I did it right with the new unit.  I still have not luck - just a box with a power light!

 

 

Message 149 of 2,100 (12,847 Views)
Tech Team
Tech Team
Lee
Posts: 17,244
Registered: ‎27-10-2008

Re: New Sure Signal - Steady Power Light Only

Hi there vchaney,

 

I responded to your post in the other thread yesterday.

 

I've requested the static IP be looked at and will get back to you with more information as I receive it.

 

Hey EMWood,

 

No worries about the delay. To be honest, because you hadn't posted back I though we'd resolved this one. Oh well....

 

I've just forced another resync of the Sure Signal serial number you posted earlier in the thread (40111328304).

 

If this doesn't work then I think we might have to look at a further replacement.

 

Let me know how it goes.

 

Thanks to you both,

 

Lee

eForum Team

Message 150 of 2,100 (12,829 Views)
Established Poster
AmareArgentum
Posts: 24
Registered: ‎10-06-2011

Re: New Sure Signal - Steady Power Light Only

Hi Lee,
Further to our conversation last night hers is an update. Unfortunately I still only have the power light on and steady. Please could you do a resynch as you suggested. Thanks for your help.
Amanda
Message 151 of 2,100 (12,826 Views)
Tech Team
Tech Team
Lee
Posts: 17,244
Registered: ‎27-10-2008

Re: New Sure Signal - Steady Power Light Only

Hi there AmareArgentum,

 

Sure thing :smileyhappy: Could you let me know the new Sure Signal serial number? I forgot to take it from you last night.

 

Cheers,

 

Lee

eForum Team

Message 152 of 2,100 (12,824 Views)
Established Poster
AmareArgentum
Posts: 24
Registered: ‎10-06-2011

Re: New Sure Signal - Steady Power Light Only

Hi Lee,
The serial number of the new SS is 40112213190.

Thanks a lot
Amanda
Message 153 of 2,100 (12,808 Views)
Tech Team
Tech Team
Lee
Posts: 17,244
Registered: ‎27-10-2008

Re: New Sure Signal - Steady Power Light Only

Hey AmareArgentum,

 

I've just forced a resync of the unit.

 

Let me know how it goes.

 

Cheers,

 

Lee

eForum Team

Message 154 of 2,100 (12,806 Views)
First Poster
Alastairmiller
Posts: 1
Registered: ‎10-07-2011

Re: New Sure Signal - Steady Power Light Only

Hello,

 

1)  I have the sure signal model 2

2) It has been woking until Friday

3) I have rebooted

4) Held reset, waited for flashing lights, removed power cable and reinserted e.g factory reset

5) De-registered and reregistered

 

 

Still only power light on ...

 

Can you help me please

 

many thanks

 

Alastair

Message 155 of 2,100 (12,805 Views)
Tech Team
Tech Team
Lee
Posts: 17,244
Registered: ‎27-10-2008

Re: New Sure Signal - Steady Power Light Only

Hi Alastairmiller,

 

Could you also provide me with your Sure Signal serial number please?

 

Cheers,

 

Lee

eForum Team

Message 156 of 2,100 (12,803 Views)
Occasional Poster
EMWood
Posts: 7
Registered: ‎01-06-2011

Re: New Sure Signal - Steady Power Light Only

Hi Lee

 

I'm not sure that a replacement will work as my partner also works from home and we swapped ss boxes and this new one works fine off the router and landline going into another room.

 

EMWood

Message 157 of 2,100 (12,789 Views)
Established Poster
AmareArgentum
Posts: 24
Registered: ‎10-06-2011

Re: New Sure Signal - Steady Power Light Only

[ Edited ]

Hi Lee

 

Sorry for the delay in responding. There is no change in the unit. It still has the power light only on and steady. Am I supposed to have done anything else?

Thanks Amanda

Message 158 of 2,100 (12,742 Views)
Occasional Poster
zozo4
Posts: 4
Registered: ‎15-07-2011

Re: New Sure Signal - Steady Power Light Only

[ Edited ]

Hi,

I received my Sure Signal 3 days ago and so far, nothing's working. I have been through the checklist on this page. I'm not up on ports and port forwarding and could do with some assistance.

My router is a Belkin Play model No. F7D4402v1 and the VSS serial is 40112305814. My ISP is Virginmedia.

 

I have definitely got an internet connection, the ethernet cable is working. I've rebooted the router. The Sure Signal is registered correctly and has been assigned an IP address on my router (192.168.2.21).

 

Hope you can assist.

Message 159 of 2,100 (12,731 Views)
Guide II
FelixDaHousecat
Posts: 406
Registered: ‎07-12-2010

Re: New Sure Signal - Steady Power Light Only

hiya

 

you'll need to speak with your router manufacturer with help on opening ports

 

id give them a call

 

fdh

Message 160 of 2,100 (12,727 Views)