cancel
Showing results for 
Search instead for 
Did you mean: 
1

Ask

2

Reply

3

Solution

Sure Signal v1 Not Working

QFieldBoden
1: Seeker

System has been working fine for years and is in regular use. No changes to other software, telephones, SIM cards or anything else. Have tried pressing the reset button on the unit, no change. Tried removing a user and re-adding the user, no change. Have taken two telephones to a different area and both phones are working and pick up a signal elsewhere perfectly well. Have then tried a full reset of the Sure Signal box and after a long time I have the "OK" light sequence as normal (1,2,& 4 ON, 3 OFF) but still no joy.

 

Reading other posts could this problem be resolved by having a firmware upgrade pushed to my unit which seems to have worked for others or do I need to do something else? Any help would be much appreciated as we currently have no operational mobile telephones in the house which is far from ideal.

 

Unit serial number: 21197038900

Post Code: NE66 2QP

1 REPLY 1

Retired-Matt_Vo
Moderator (Retired)
Moderator (Retired)

Hi

Please take a look at our Sure Signal Troubleshooting thread. If this doesn’t resolve your query, please post your reply either below, or in the relevant thread, together with the details requested, including the following information.

Your speed test results from here.

Your ping test results from here.

Your external IP address from here.

The results of a traceroute.

 

Your Sure Signal serial number:

 


VSS Traceroute command

On a PC:

Click on Start and select Run

Type CMD into the Run box and press enter/click ok

A black box will appear.

In this box type tracert 212.183.133.177 press Enter

Paste the output of this command into your reply.

This will help us get the quickest possible resolution for you.

Thanks

Matt
Moderator