cancel
Showing results for 
Search instead for 
Did you mean: 
1

Ask

2

Reply

3

Solution

Sure Signal v1 - still not working after factory reset

pricep1
2: Seeker
2: Seeker

Hi - had a power cut this morning and the SS stopped working - checked forum and did factory reset.

For over an hour it went through the circle of lights and the first two lights were steady and the fourth light flashed but then all lights go off and the cycles starts again - this happened about 5 times but now only the power light is on and nothing else - please help as we have no phone coverage at all.

 

Thanks

3 REPLIES 3

Gemma
Community Manager
Community Manager

Hi pricep1,

Please take a look at our Sure Signal Troubleshooting thread. If this doesn’t resolve your query, please post your reply either below, or in the relevant thread, together with the details requested, including the following information.

Your speed test results from here.

Your ping test results from here.

Your external IP address from here.

The results of a traceroute.

 

Your Sure Signal serial number:

 


VSS Traceroute command

On a PC:

Click on Start and select Run

Type CMD into the Run box and press enter/click ok

A black box will appear.

In this box type tracert 212.183.133.177 press Enter

Paste the output of this command into your reply.

This will help us get the quickest possible resolution for you.

Thanks,

Gemma

Same problem - done all the resets and testing and speaking for vodafone techincal and still sure signal does not work.

Hi TheArchetect,

 

Can you provide the information requested above for me as well?

 

Dave