cancel
Showing results for 
Search instead for 
Did you mean: 
1

Ask

2

Reply

3

Solution

VSS1 won't connect after power cut - needs re-sync?

Fenboy
4: Newbie
My sure signal won't connect after several power interuptions. Is it possible to get it re-sync'd? (Tried resetting my side). I get solid power light, then #2 light and #4 light flashing, then starts again over and over again over 24+ hours.

SN is 253112320

Cheers

Matt
1 ACCEPTED SOLUTION

BandOfBrothers
17: Community Champion
17: Community Champion

Hi,

 

 

It may also be worth trying a different power supply with the SureSignal (Version 1 & 2 ), as there have been some reports of replacement power supplies solving the issues. Even if lights / power are showing. They are available on eBay for around £10.

 

From member cineriv "But firstly, have a look around for a suitable unit with a 12 Volt output @ around 1.5Amp capacity that you could 'borrow' to prove the fault. Suitable units can be found on external hard drives, monitors, printers, routers etc.etc."

Current Phone  >

Samsung Galaxy s²³ Ultra 512gb Phantom Black.

 

 

View solution in original position

3 REPLIES 3

BandOfBrothers
17: Community Champion
17: Community Champion

Hi,

 

 

It may also be worth trying a different power supply with the SureSignal (Version 1 & 2 ), as there have been some reports of replacement power supplies solving the issues. Even if lights / power are showing. They are available on eBay for around £10.

 

From member cineriv "But firstly, have a look around for a suitable unit with a 12 Volt output @ around 1.5Amp capacity that you could 'borrow' to prove the fault. Suitable units can be found on external hard drives, monitors, printers, routers etc.etc."

Current Phone  >

Samsung Galaxy s²³ Ultra 512gb Phantom Black.

 

 

Seems to have done the trick! Thanks!

BandOfBrothers
17: Community Champion
17: Community Champion

Good to hear. 

 

You're welcome. 

Current Phone  >

Samsung Galaxy s²³ Ultra 512gb Phantom Black.