cancel
Showing results for 
Search instead for 
Did you mean: 
1

Ask

2

Reply

3

Solution

SureSignal 1 not working - please RESYNC

andylaws
2: Seeker
2: Seeker

Would you please try a RESYNC. My SureSignal 1 has not been working since last week, I've tried everything from reset to changed power supply but nothing has worked.

---------------------------------------------TEMPLATE--------------------------------------------

 

The issue you’re experiencing:

I have a Suresignal 1 which is not broadcasting a signal

I have attempted full reset several times but after initial sequence of flashing lights it always settles to 1&2 on and 3&4 off



What light sequence you're seeing:

1&2 solid 3&4 off for significant period then cycles through 'reset sequence'



Your speed test results from here.

Ping 18ms Download 9.37Mbps Upload 0.74



Your external IP address from here.

 86.139.11.214



Your Sure Signal serial number:

21223456878 



The results of a traceroute.


C:\Users\Andy>tracert 212.183.133.177

Tracing route to 212.183.133.177 over a maximum of 30 hops

1 2 ms 1 ms 2 ms bthub.home [192.168.1.254]
2 * * * Request timed out.
3 14 ms 13 ms 13 ms 31.55.187.181
4 16 ms 14 ms 14 ms 31.55.187.180
5 15 ms 15 ms 43 ms 195.99.127.222
6 17 ms 16 ms 15 ms 213.121.193.207
7 18 ms 12 ms 13 ms t2c3-et-3-3-0-0.uk-lon1.eu.bt.net [166.49.211.238]
8 15 ms 15 ms 14 ms 166-49-211-254.eu.bt.net [166.49.211.254]
9 * * * Request timed out.
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.

Trace complete.





3 REPLIES 3

Amanda
Community Manager
Community Manager

Hi @andylaws

 

I've just updated some things from our end, including a resync. 

 

Could you please complete a reset after 6 hours and let us know if it's working OK?

 

Thanks,

 

 

Hi Amanda,

I performed the reset last night at around 23:00 as requested 6+ hrs after your post. This morning, however, my SureSignal is still not working and continues to run through the sequence previously described. What should I do next ? 

Jenny
Moderator (Retired)
Moderator (Retired)

@andylaws - Your Sure Signal last connected to our servers this morning. Please try restarting your phone to see if it then connects.

 

If this doesn’t work, please check that your Sure Signal has been assigned an internal IP address by your router:

 

The Sure Signal must be assigned an internal IP address by your router. If your router supports DHCP (Dynamic Host Configuration Protocol), this must be enabled as doing so will enable the router to assign an IP address to your Sure Signal automatically.


For more instructions on how to do this, please check your router manual or contact your ISP or router manufacturer.

 

If your router or network configuration doesn’t allow DHCP, you’ll need to assign a static IP address to your Sure Signal's MAC Address by using your router's configuration panel. Please contact your ISP or router manufacturer for instructions on how to do this. The MAC address can be found on the sticker at the back of the Sure Signal.