cancel
Showing results for 
Search instead for 
Did you mean: 
1

Ask

2

Reply

3

Solution

Suresignal V2 problem

wells01
2: Seeker
2: Seeker

Hi

Ive used a suresignal v3 for the last couple of years but unfortunately this has burnt out.

I have swapped to a suresignal v2 which I have registered successfully.

I have reset this, replaced the power supply and the ethernet cable on this but cannot get this to connect.

I get a red power light permanantly on and the 1st two lights flashing.

Can this device be reset/resynced from your end.

Many thanks

Details Are below.

Serial number 40122430024
External IP: 162.158.154.177
Download 13.3
Upload 1.22
Jitter 0.47

Ports opened 

  • 8
  • 50
  • 123
  • 500
  • 1723
  • 4500

 

traceroute to 212.183.133.177 (212.183.133.177), 64 hops max, 52 byte packets

1  192.168.1.254 (192.168.1.254)  3.123 ms  1.756 ms  2.397 ms

2  * * *

3  * * *

4  217.41.217.61 (217.41.217.61)  18.048 ms  13.120 ms  8.221 ms

5  host109-159-245-114.range109-159.btcentralplus.com (109.159.245.114)  9.373 ms  9.428 ms  8.223 ms

6  213.120.182.69 (213.120.182.69)  9.495 ms  12.163 ms  9.018 ms

7  31.55.164.109 (31.55.164.109)  8.987 ms  9.685 ms  9.522 ms

8  acc2-10gige-0-2-0-7.bm.21cn-ipp.bt.net (109.159.248.238)  9.086 ms

    acc2-10gige-0-2-0-6.bm.21cn-ipp.bt.net (109.159.248.236)  10.431 ms

    109.159.248.207 (109.159.248.207)  10.817 ms

9  core2-te0-3-0-15.ilford.ukcore.bt.net (109.159.248.26)  17.847 ms

    core2-te0-15-0-16.ilford.ukcore.bt.net (109.159.248.32)  17.307 ms

    core1-te-0-2-5-0.ilford.ukcore.bt.net (109.159.248.128)  16.157 ms

10  peer6-te0-0-0-9.telehouse.ukcore.bt.net (194.72.31.155)  14.014 ms  14.678 ms

    peer6-te0-10-0-10.telehouse.ukcore.bt.net (109.159.254.167)  15.886 ms

11  t2c3-et-8-1-0-0.uk-lon1.eu.bt.net (166.49.211.240)  14.719 ms

    t2c3-et-7-3-0-0.uk-lon1.eu.bt.net (166.49.211.230)  14.539 ms  15.366 ms

12  166-49-211-254.eu.bt.net (166.49.211.254)  13.974 ms  19.887 ms  13.921 ms

13  * * *

14  * * *

15  * * *

16  * * *

17  * * *

18  * * *

19  * * *

20  * * *

21  * * *

22  * * *

23  * * *

24  * * *

25  * * *

26  * * *

27  * * *

28  * * *

29  * * *

30  * * *

31  * * *

32  * * *

33  * * *

34  * * *

35  * * *

36  * * *

37  * * *

38  * * *

39  * * *

40  * * *

41  * * *

42  * * *

43  * * *

44  * * *

45  * * *

46  * * *

 

11 REPLIES 11

BandOfBrothers
17: Community Champion
17: Community Champion

While Vodafone sort out the issue with your v2 you can ask for the v3 to be replaced even if the manufacturing warranty has expired which is 24 months. 

Ask Customer Services on 191 about this as they are aware of the issues with some of the v3 SS Units. 

Current Phone  >

Samsung Galaxy s²³ Ultra 512gb Phantom Black.

 

 

Many thanks for your reply.

I did not realise it could be replaced. In the meantime is it possible to get my V2 resynced?

Is it possible to check from the vofafone end?

How do I go about it?

Regards

John
Moderator (Retired)
Moderator (Retired)

@wells01 I've taken a look at your Sure Signal and can see this has recently been deregistered.
Please reregister this via My Vodafone.
If you still have the same light sequence after this, please reboot the router.
If the issue persists, you'll need to factory reset your device.
To do this, please follow these steps:

  • Hold the reset button for around 30 seconds until all the lights flash.
  • Keeping the reset button held, remove and re-insert the power lead.
  • Once all the lights come back on, release the reset button.
  • The VSS should come online within the hour.

Please let us know how you get on with this :Smiling:

Hi John

Many thanks for your reply.

I re-registered and reconneceted and it sat with just one light for 12 hours.

I then reset it as per you instructions and it has reverted to two flashing lights as before.

Can you possibly take another look?

Many thanks.

Hi

Now only showing power and the 1st light.

 

Hi

How do I go about getting this re-synced at Vodafone?

Regards

 

Gemma
Community Manager
Community Manager

@wells01 - I’ve checked the IP address that you’ve posted on your first message (162.158.154.177) and it’s not showing on our whitelist.

I’ve requested this to be updated for you. Please allow up to 48 working hours.

If you need any further help after this, please let us know. ☺️

Many thanks

Gemma
Community Manager
Community Manager

@wells01 - Thanks for your patience with this!

We’ve had an update to advise the IP address you gave, is showing as part of a range in the USA.

If you’re in the UK, please obtain confirmation from your Internet Service Provider, that the address and any additional IPs in the range, are for sole use in the UK.