cancel
Showing results for 
Search instead for 
Did you mean: 
1

Ask

2

Reply

3

Solution

Sure Signal V3 not working with Netgear D7000 router

Yeltol
2: Seeker
2: Seeker
My Sure Signal v1 recently stopped working since I got it in 2010 and only displayed a power on light (green). Despite various attempts to resuscitate it with Vodafone’s help including umpteen factory resets it was declared dead, I decide to purchase a new v3 model (serial 42143136051). Apparently it is an improvement on the earlier models and can cope better with lower broadband speeds – or so I was led to believe. I managed to register it okay (the easy bit), but when I came to turn it on it also failed to work! There is a moral here I’m sure? When I first turned it on the power light came on followed by the first light flashing to indicate it was trying to connect to the web. After a few minutes this light went out and the last two lights showed amber. Having purchase a new router (Netgear D7000) and Draytek Vigor 120 modem earlier in the year I decided to reset the router back to the factory settings, as there had been a number of recent firmware updates since I first installed it. Thought that may have been the cause, but no luck. At this point I contacted Vodafone again and was told to open up the following ports: 8, 50, 53, 67, 68, 123, 500, 1723, 4500 & 33434 – 33445 I configured port forwarding on the router and set the Address Reservation in the LAN menu to fix the SS IP address, otherwise it would change each time the router is re-booted. Bounced router and still no luck. I have also performed a VSS Traceroute and got the following: Tracing route to cluster4.vap.vodafone.co.uk [212.183.133.177 over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms READYSHARE [192.168.1.1] 2 95 ms 34 ms 33 ms esr9.faraday3.broadband.bt.net [217.47.166.140] 3 39 ms 34 ms 34 ms 217.47.166.13 4 34 ms 34 ms 40 ms 213.1.69.82 5 34 ms 34 ms 34 ms 217.41.168.57 6 34 ms 34 ms 34 ms 217.41.168.107 7 35 ms 34 ms 34 ms acc1-10GigE-0-2-0-6.l-far.21cn-ipp.bt.net [109.159.249.101] 8 35 ms 34 ms 34 ms core4-te0-10-0-26.faraday.ukcore.bt.net [109.159.255.197] 9 35 ms 34 ms 34 ms 62.6.201.185 10 38 ms 38 ms 36 ms lndgw2.arcor-ip.net [195.66.224.124] 11 37 ms 36 ms 36 ms 85.205.0.93 12 * * * Request timed out. 13 * * * Request timed out. 14 * * * Request timed out. 15 * * * Request timed out. 16 * * * Request timed out. 17 * * * Request timed out. 18 * * * Request timed out. 19 * * * Request timed out. 20 * * * Request timed out. 21 * * * Request timed out. 22 * * * Request timed out. 23 * * * Request timed out. 24 * * * Request timed out. 25 * * * Request timed out. 26 * * * Request timed out. 27 * * * Request timed out. 28 * * * Request timed out. 29 * * * Request timed out. 30 * * * Request timed out.Trace complete. Does anyone out there have any further suggestions, as I am getting somewhat frustrated with this now? ISP is BT conventional (snail speed) broadband. And modem is set to PPPoE. By the way we also have an EE SS box which has presented no problems whatsoever day 1 – easy plug and play. This was turned off in case there had been and conflict issues between the two SS boxes.
7 REPLIES 7

Gemma
Community Manager
Community Manager

Hi Yeltol,

 

Your Sure Signal hasn’t made any contact with the network.

 

Please test it at a different location and if possible with a different Ethernet cable.

 

If it’s working ok at a different location, please let us know:

 

  1. The light sequence you’re now seeing and your speed test results
  2. Your speed test results from here
  3. Your ping test results from here
  4. Your external IP address from here

 

Thanks,

 

Gemma

Hi Gemma, I have now tried the SS box at various locations around the house (we have a home cat5 network) using different leads, but still no luck I’m afraid. I have run the test you wanted me to, the results are as follows: Speed Test ranges, but is more or less Download = 1.78Mbps Upload = 0.34Mbps Ping Latency = 37.13ms. I used the BT test site which is the one the engineers use. http://www.speedtest.btwholesale.com/ IP Address = 86.137.208.207 IP V6 address = ::ffff:5689:d0cf Any more suggestions? What I am confused about is that nothing has been changed on my home network to explain why all of a sudden the old/new SS fail to work? I have to re-boot the router/modem and all ancillaries from time-to-time, but that is normal. The EE SS has worked fine from day 1 and is working today. Regards, Andy

I want to add that we have also have a 3 network SS box (my sons) that is also working ok.   If I cannot get this sorted soon I will have no alternative than to switch networks and return the Vodafone SS box to get a refund

Got fed up waiting so called SS support.   They told me to take the SS to the shop where I bought it from to get it tested.  Shop busy so left it with them.   Came back later only to be told they could not test it in the shop as they don't have a  broadband connection!   Technical person in the shop said that the V3 models are liable to connectivty issues - great.   A new SS has been ordered so will see if that one works?   Watch this space.

Retired-Laura
Moderator (Retired)
Moderator (Retired)

Hi Yeltol,

 

Thanks for the update.

 

If you need anything else let us know.

 

Cheers,

 

Laura

I have the exact same issue, and have carried out the exact same changes and just as you still not working

did you ever get the SS V3 working ??

 

I believe it might be something that the Netgear router is doing or blocking

I intend to put the old BT home hub back to test

 

Thanks

Andy (yes my name is also Andy, spooky)

hi All,

 

turnes out to be nothing to do with the port forwarding,

it was the power supply on the V1 sure signal,

found the answer on another post

 

it looks like it's working, lights on flashing and so on, but put a spare 12v 2.5amp psu on there and 10 minutes later it was working

 

thanks

Andrew