Ask
Reply
Solution
17-02-2014 07:51 PM
I have the original Sure Signal, which works with my Blackberry Q10.
I want to buy the latest Sure Signal. The spec says that it works with a Z10, but does not mention the Q10. Is this the same Blackberry platform and will the new Sure Signal work with my Q10?
Cheers
Solved! Go to best answer.
17-02-2014 09:10 PM
You will be fine
All versions of suresignal only have two 'connect to the phone' requirements and that is that they are:
a) UK 3G
b) On Vodafone
As there are only a handful of new phones out there (very very basic ones) that only run on 2G and wouldn't work, and some foreign sourced handsets don't use the same frequencies... however your Q10 will be fine.
17-02-2014 09:10 PM
You will be fine
All versions of suresignal only have two 'connect to the phone' requirements and that is that they are:
a) UK 3G
b) On Vodafone
As there are only a handful of new phones out there (very very basic ones) that only run on 2G and wouldn't work, and some foreign sourced handsets don't use the same frequencies... however your Q10 will be fine.
23-04-2014 02:09 PM - edited 23-04-2014 02:09 PM
Not sure if this is entirely correct.
I have a Galaxy S4 and it does not work with a gen 1 Suresignal yet it does with the gen 3 we have at our office.
It did work flawlessly and something has changed.
I have tried several times to to get this fixed, Vodafone store will not replace it, as apparently it is not faulty.
191 told me to take it to the store for a replacement, which they will not, see above.
191 called again apparently to reset the unit 'worked' for a bout a day.
All are claiming this is a Samsung issue and is their responsibility, my contract is with Vodafone not Samsung so why are they ignoring me??
23-04-2014 03:19 PM
Hi Blanchoid,
Please take a look at our Sure Signal Troubleshooting thread. If this doesn’t resolve your query, please post your reply either below, or in the relevant thread, together with the details requested, including the following information.
Your speed test results from here.
Your ping test results from here.
Your external IP address from here.
The results of a traceroute.
Your Sure Signal serial number:
VSS Traceroute command
On a PC:
Click on Start and select Run
Type CMD into the Run box and press enter/click ok
A black box will appear.
In this box type tracert 212.183.133.177 press Enter
Paste the output of this command into your reply.
This will help us get the quickest possible resolution for you.
Thanks,
Matt B
25-04-2014 03:09 PM
Hi Matt,
Cannot find anything in troubleshooting appropriate, I have swapped this out with another site to test as this site had a SS3 that is not reallt used.
Last result was that the box had all 4 lights on solid no activity on Ethernet port both lights solid.
Now restarting.
Collected results below
Speed test results: Down 33.39Mbps, up 0.76Mbps
Ping test results: 16ms, Jitter 8ms, packet loss 0%
My external IP address: 94.125.132.161
The results of a traceroute
>tracert 212.183.133.177
Tracing route to cluster4.vap.vodafone.co.uk [212.183.133.177]
over a maximum of 30 hops:
1 6 ms 9 ms 3 ms ge0-412.uwsp-bgp.warwick.net.uk [94.125.132.166]
2 12 ms 12 ms 11 ms te4-2.uwsp-scr3.warwick.net.uk [94.125.133.208]
3 5 ms 10 ms 7 ms gi2-16-299.uwsp-scr2.warwick.net.uk [94.125.133.167]
4 9 ms 14 ms 10 ms 83.217.238.113
5 11 ms 13 ms 13 ms ae-0.cw.londen03.uk.bb.gin.ntt.net [129.250.66.46]
6 74 ms 75 ms 59 ms 195.2.30.61
7 * * * Request timed out.
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.
Trace complete.
Your Sure Signal serial number: 21197027440
25-04-2014 03:16 PM
An update after restart.
Light 1 comes on, stays on.
After a peroid of time light 2 flashes.
After a while longer light 4 starts flashing as well as light 2.
Then all 4 come on and stay on.
25-04-2014 05:16 PM
Suresignal is now sitting with just lights 1 and 2 steady, 3 and 4 are off.
26-04-2014 04:47 PM
Hi Blanchoid
I’ve requested a firmware update for your Sure Signal, which will be pushed through in the next 48 hours.
Once it’s completed, you’ll need to do a factory reset as follows:
Thanks
Simon
28-04-2014 10:00 AM
Hi Simon,
I have performed the reset according to Suresignal 1 document.
Unit is up with all 4 lights on solid as it has done previously.
28-04-2014 02:59 PM