Comprehensive set of settings for Vodafone fibre broadband connection

[keeptriin]

I'd like to use a DSL modem to connect my home network and 3rd party router with a bit more stability/reliability than the standard Vodafone router can offer. 

From Vodafone I know:

- My username

- My password

- That I need to use VLAN ID 101 

- Connection is over PPPoE

Fine. However there are other settings that I think I also need, like

- Connection method: VDSL/VDSL2/...?

- Encapsulation type: LLC/VC-MUX

- VPI/VCI: 0/38? 0/101?

- MTU size: 1400/1492/1500?

I can try these settings out, but if anyone has these already, I'd be grateful as it would save some time for sure!!

Thanks

[machare]

See the Danylee1980 post on the first page in this thread

I use:

General
    Active  Yes
    Name :  VDSL   (Greyed out)
    Type :  ADSL/VDSL over PTM   (Greyed out)
    Mode :  Routing
    Encapsulation: PPPoE
    IPv6/IPv4 Mode:  IP6/IPv4 DualStack     

PPP Information
    PPP User Name : dsl000123456 at broadband.vodafone.co.uk
    PPP Password :
    PPP Trigger Type :  Auto Connect  
    Authentication Method: Auto
    IDLE Timeout [minutes]: 5  (Greyed out)
    PPPoE Service Name :  Blank
    PPPoE Passthrough :   Blank  

IP Address
    Obtain an IP Address Automatically (Selected)
    Static IP Address :  Blank
    Subnet Mask :        Blank
    Gateway IP Address : Blank

Routing Feature
    NAT Enable:  Selected
    Fullcone NAT Enable : Blank
    IGMP Proxy Enable: Selected
    Apply as Default Gateway: Selected

DNS server
    DNS: Dynamic
    DNS Server 1 : Blank
    DNS Server 2 : Blank

IPv6 Address
    IPv6 Address: Automatic
    Get IPv6 from DHCPv6 Server (A_NA) Not selected
    Prefix Delegation (A_PD)  Selected

IPv6 Routing Feature
    MLD Proxy Enable: Blank
    Apply as Default Gateway: Blank

IPv6 DNS Server :
    IPv6 DNS: Dynamic
    IPv6 DNS Server 1: Blank
    IPv6 DNS Server 2: Blank

VLAN
    Active : Yes
    802.1p : 0    
    802.1q : 101
 
QoS
    Rate Limit : blank
    WAN Outgoing Default Tag : Disable
    802.1p Blank  (Greyed out)
    DSCP : Blank  (Greyed out)
 
MTU
    MTU Size : 1492

Bridge and Routing mode in the same WAN
    Enable Con-current WAN (not selected)