Ask
Reply
Solution
16-03-2016 08:34 AM
I had a series of short power cuts yesterday, and now my suresignal box (2) will not work correctly. It's been sat overnight now with a solid red light and the other two flashing.
Upto now it's been working fine. Please see details below
The issue you’re experiencing:
What light sequence you're seeing:solid red, other two flashing
Your speed test results: download is 24.52, upload is 18.21
Your external IP address 86.140.78.238.
Your Sure Signal serial number: 40123236438
The results of a traceroute:
16-03-2016 09:23 AM
Hi
Please take a look at My-sure-signal-has-stopped-working-what-should-I-do.
As a troubleshooting tip It may also be worth trying a different power supply with the SureSignal (Version 1 & 2 ), as there have been some reports of replacement power supplies solving the issues. Even if lights / power are showing.
They are available on eBay for around £10.
From member cineriv "But firstly, have a look around for a suitable unit with a 12 Volt output @ around 1.5Amp capacity that you could 'borrow' to prove the fault. Suitable units can be found on external hard drives, monitors, printers, routers etc.etc."
Current Phone >
Samsung Galaxy s²⁴ Ultra 512gb.
16-03-2016 09:46 AM
Thanks for this,
I've been through the help guides including resetting and turning off of smart hub settings. The end point was collecting the information posted above.
This feels like a a server issue tbh, especialy as it was working absoutely fine and then stopped. I'm wandering if the power cuts have meant a queue of box/server handshakes that need cleared by admin.
I'm not sure how to go about the power supply check without buying a new power supply - would rather confirm with Voadafone first if my box is talking to their servers bnfore spending any more money.
16-03-2016 10:11 AM
You're welcome.
I hope this is resolved ASAP for you.
The latter part of my reply indicates on what types of power supplies that are around the home typically.
Current Phone >
Samsung Galaxy s²⁴ Ultra 512gb.