Ask
Reply
Solution
24-04-2013 10:36 PM
Hi,
I've just got a new Z10 and swapped my old SIM for a new MicroSIM. I knew the Suresignal would take time to register it but 9 hours after the event my SIM still won't register.
So, tried removing the mobile number from the gateway and re-adding it (as I was the owner that was a bit of hassle).
However, even after doing that it still won't register properly. Any ideas to get this SIM sorted please?
SureSignal = 21196948968
Thanks
Rob
25-04-2013 08:46 AM
Andsellrk,
The SureSignal users the unique serial number of your SIM to determine wether your phones allowed to connect or not. As this has changed it now thinks you phone is no londer allowed access. There are a few ways to fix this, they dont all work for everybody.
Nabs
25-04-2013 03:09 PM
Hi ansellrk,
I’ve just resynced your device for you so, to make sure the resync completes, can you perform a factory reset:-
Hold down the reset button until all the lights show/flash (about 30 seconds)
Keeping the reset button held down, remove then re-insert the power lead.
Once all lights display release the reset button.
The Sure Signal will come online in around 1 hour.
Let me know if you're still experiencing issues.
Thanks,
Kay
30-04-2013 12:11 PM
Hi, sorry I didn't update sooner... been mad busy!
The SIM was working as soon as I got home (no need to reset Suresignal). This is the second SIM I've needed doing in the last 6 months and both times your "Resync" seems to do the trick so thanks.
All working as expected now. :smileywink:
Rob
01-05-2013 10:41 AM