Mobile Connect And Draytek Router

[nickoedwards]

Hi, I'm trying to configure our my mobile broadband to work with our router, its asking for a load of settings and i've tried a few differnet options but i'm just want to double check if they are compatible and what the settings might be.

I have a Vodafone Mobile Connect K3760 HSPA USB Stick and a Draktek Vigor 2820 router.

Any ideas?

[vodabusiness]

Hi, I'm trying to configure our my mobile broadband to work with our router, its asking for a load of settings and i've tried a few differnet options but i'm just want to double check if they are compatible and what the settings might be.

I have a Vodafone Mobile Connect K3760 HSPA USB Stick and a Draktek Vigor 2820 router.

Any ideas?

What info exactly is it asking for?

[Neil_Brown]

Nick - do any of the existing threads on the forum help? I'm pretty sure that this has come up before?

[Retired-Jon_V]

Hi, I'm trying to configure our my mobile broadband to work with our router, its asking for a load of settings and i've tried a few differnet options but i'm just want to double check if they are compatible and what the settings might be.

I have a Vodafone Mobile Connect K3760 HSPA USB Stick and a Draktek Vigor 2820 router.

Any ideas?

Hi Nick,

As we're not familiar with this router, we'll need to know exactly what settings you're being asked for. We should then be able to fill in the gaps for you and get you up and running

Please get back to us and let us know what you need

Jon

eForum Team

[nickoedwards]

Hi,

I did a search, but I'll be honest, I got a little confused as to which router and mobile broadband combination the threads were discussing. One thread I was reading mentioned that the combination in question was not compatible, after closer inspection, I have a newer model router and mobile broadband stick.

The router is asking for pretty much the same information as previous model routers:

SIM PIN code
Modem Initial String (Default:AT&FE0V1X1&D2&C1S0=0)
APN Name
Modem Dial String (Default:ATDT*99#)
PPP Username (optional)
PPP Password (optional)

Has anyone had any experience with this router / mobile broadband combination?

[Retired-Jon_V]

SIM PIN code

This will only apply if you have set a PIN lock number on your SIM card. You should be able to leave this blank.

Modem Initial String (Default:AT&FE0V1X1&D2&C1S0=0)

Change this to the following:
AT+CGDCONT=1,"IP","internet"

APN Name

For this, type in the word "internet"

Modem Dial String (Default:ATDT*99#)

Leave this as the default setting.

PPP Username (optional)
PPP Password (optional)

For both of these, enter the word "web".

That should be you sorted!

Let me know if there are any hiccups and I'll see what I can do

Jon

eForum Team

[nickoedwards]

Hi Jon, I put all the settings in, but it doesn't seem to be connecting. When looking at the status, I get the following:

Message

Any ideas?

[Neil_Brown]

If you can access the router via telnet and dump the ppp log here, I can take a look at it for you.

My feeling is that that init. string may not work with a USB modem, as I know we use different strings in the Vodafone Mobile Connect software, and also for a non-VMC ppp connection.

I'll see if I can dig out a different init.string.

[pccorrect]

Hi,

I am new to this forum and I have joined especially for this thread. Unfortunately, I have exactly the same problem as "nickoedwards" and I have found the ppp logs which I am pasting below:


0:00:00.510 DSL: DSL Channel = 0
0:00:00.510 DSL: PPP Type = 0 (0 : PPPoA, 1 : PPPoE
2:IPoA)MLPI☺0:00:00.510 DSL: Encapsulation Type = 0 (0: VCMUX, 1: LLC,
2: 1483_LLC_3: 1483_LLC_ROUTED, 4: 1483_VCMUX_ROUTED, 5: 1483_VCMUX_ROUTED,
6MLPI☺0:00:00.510 DSL: VCI = 38
0:00:00.510 DSL: VPI = 0
0:00:00.510 DSL: modulation type = 2 ( 0 : T1.413, 1 : G.Lite, 2 :
G.DMltiAuto)
0:00:04.180 DSL: HSDPA: Set E220 Remote Wakeup
Fail!!!!MLPI☺0:00:05.580 DSL: HSDPA: Set E220 Remote Wakeup
Fail!!!!MLPI☺0:00:07.000 DSL: HSDPA: Set E220 Remote Wakeup
Fail!!!!MLPI☺0:00:08.400 DSL: HSDPA: Set E220 Remote Wakeup
Fail!!!!MLPI☺0:00:09.800 DSL: HSDPA: Set E220 Remote Wakeup
Fail!!!!MLPI☺0:00:11.210 DSL: HSDPA: Set E220 Remote Wakeup
Fail!!!!MLPI☺0:00:12.620 DSL: HSDPA: Set E220 Remote Wakeup
Fail!!!!MLPI☺0:00:14.030 DSL: HSDPA: Set E220 Remote Wakeup
Fail!!!!MLPI☺0:00:15.440 DSL: HSDPA: Set E220 Remote Wakeup
Fail!!!!MLPI☺0:00:16.850 DSL: HSDPA: Set E220 Remote Wakeup
Fail!!!!MLPI☺0:00:18.270 DSL: HSDPA: Set E220 Remote Wakeup
Fail!!!!MLPI☺0:00:19.680 DSL: HSDPA: Set E220 Remote Wakeup
Fail!!!!MLPI☺0:00:21.090 DSL: HSDPA: Set E220 Remote Wakeup
Fail!!!!MLPI☺0:00:22.500 DSL: HSDPA: Set E220 Remote Wakeup
Fail!!!!MLPI☺0:00:23.910 DSL: HSDPA: Set E220 Remote Wakeup
Fail!!!!MLPI☺0:00:25.320 DSL: HSDPA: Set E220 Remote Wakeup
Fail!!!!MLPI☺0:00:26.730 DSL: HSDPA: Set E220 Remote Wakeup
Fail!!!!MLPI☺0:00:28.140 DSL: HSDPA: Set E220 Remote Wakeup
Fail!!!!MLPI☺0:00:29.550 DSL: HSDPA: Set E220 Remote Wakeup
Fail!!!!MLPI☺0:00:30.960 DSL: HSDPA: Set E220 Remote Wakeup
Fail!!!!MLPI☺0:00:32.370 DSL: HSDPA: Set E220 Remote Wakeup Fail!!!!
0:00:33.780 DSL: HSDPA: Set E220 Remote Wakeup Fail!!!!H┤

Any kind of help would be much appreciated.

Thank you.

If you can access the router via telnet and dump the ppp log here, I can take a look at it for you.

My feeling is that that init. string may not work with a USB modem, as I know we use different strings in the Vodafone Mobile Connect software, and also for a non-VMC ppp connection.

I'll see if I can dig out a different init.string.

[Retired-Jon_V]

Any kind of help would be much appreciated.

Thank you.

Hi PCCorrect,

I'm afraid this has stepped outside of my comfort zone now
Hopefully Neil will be able to find another string for you to try - however, officially I don't think we're able to offer any further support on this particular setup. Sorry

Jon

eForum Team