VSS1 won't connect after power cut - needs re-sync?

[Fenboy]

My sure signal won't connect after several power interuptions. Is it possible to get it re-sync'd? (Tried resetting my side). I get solid power light, then #2 light and #4 light flashing, then starts again over and over again over 24+ hours.

SN is 253112320

Cheers

Matt

[BandOfBrothers · Accepted solution]

Hi,

It may also be worth trying a different power supply with the SureSignal (Version 1 & 2 ), as there have been some reports of replacement power supplies solving the issues. Even if lights / power are showing. They are available on eBay for around £10.

From member cineriv "But firstly, have a look around for a suitable unit with a 12 Volt output @ around 1.5Amp capacity that you could 'borrow' to prove the fault. Suitable units can be found on external hard drives, monitors, printers, routers etc.etc."

[Fenboy]

Seems to have done the trick! Thanks!

[BandOfBrothers]

Good to hear. 

You're welcome.