Ask
Reply
Solution
11-01-2013 12:41 PM - last edited on 14-07-2014 05:36 PM by Jenny
This thread's been created to discuss and troubleshoot the version 3 Sure Signal when the light sequence is as follows:
Cause
This light sequence indicates the Sure Signal's not active because the location check has failed
Troubleshooting
Please verify the location is correct to which the Sure Signal is registered. If the location is correct and the symptoms continue please post at the end of this thread with your Sure Signal serial number.
This will help us get the quickest possible resolution for you.
Thanks
LeeH
01-04-2015 10:55 PM
Hi,
The lights I have:
Solid red, solid power, solid network.
'User' light isn't on, and of course I am getting no coverage / service.
Tried resetting, tried de-registering and then registering again.
You assistance would be appreciated.
Regards,
Yoav
15-08-2015 08:35 PM
19-08-2015 02:29 PM
19-08-2015 03:27 PM
Hi Sukhi,
Things don't appear to be resolved for me.
I unplugged router and VSS3 for 10mins but still no joy connecting.
Can you advise further?
21-08-2015 02:23 PM
Please try connecting your Sure Signal in another location, such as a friend or family member's house. You’ll need to leave it connected for at least 24 hours.
We'll then be able to determine if the problems are specific to your location and router or with the Sure Signal itself.
It's also worth trying another Ethernet cable so we can rule out the connection as the problem.
19-08-2015 08:10 PM
My ss isnt working either.
19-08-2015 09:56 PM - edited 19-08-2015 09:58 PM
A further tweak to my router firewall and what must be my 50th reset in a week seems to be doing the trick. The SS is configuring itself. I hope I am going to get two solid white lights shortly.
EDIT. All working now.