Ask
Reply
Solution
21-09-2012 10:00 AM
Please help,
I have changed my micro sim to a nano sim ready for my iphone 5 delivery today, however since I swapped over the sim card my phone won't connect to the sure signal.
My wifes phones is working fine, please help
30-05-2016 11:17 PM
I cannot seem to get SS v2 40120247016 going with two brand new Vfone iPhone 5. I have re-registered the device and added the numbers of the 2 vodafone handsets. My Vodafone reports that all is well. Please can Vfone check your end.
31-05-2016 11:48 AM
To remove the lead number you'll need to deactivate the Sure Signals and then reregister them again. You can see how to do this here.
Please take a look at our Sure Signal Troubleshooting thread. If this doesn’t resolve your query, please post your reply either below, or in the relevant thread, together with the details requested, including the following information.
Your speed test results from here.
Your ping test results from here.
Your external IP address from here.
The results of a traceroute.
Your Sure Signal serial number:
VSS Traceroute command
On a PC:
Click on Start and select Run
Type CMD into the Run box and press enter/click ok
A black box will appear.
In this box type tracert 212.183.133.177 press Enter
Paste the output of this command into your reply.
This will help us get the quickest possible resolution for you.
21-06-2016 01:25 PM
It still seems to be a recocring issue with voadafone sure signal. I have the same issue now.
My sure signal 2 box s/n 40111013062 was working fine with a micro SIM + HTC phone. I then upgraded to a nano SIM & a galaxy S7, and ported my number across to the new SIM. Since then I cannot connect to the sure signal, even when putting the new SIM in the old phone (with the micro SIM surround)
I have done a factory reset on the sure signal, un registered the device & registered it. Rebooted the phone several times. Verified the phone is running all the latest s/w - it is (Android 6.0.1, 2nd April patch level)
Pretty sure its at the vodafone end, but as I have no signal in the house, the phone service is pretty useless to me.
If anybody has any brilliant ideas, I would be grateful to hear them, or its a another go with thier support folks
21-06-2016 01:35 PM
21-06-2016 04:30 PM
By the grace of the great vodafone spirit which inhabits the ether, it now seems to be working. Quite what cured it I am not 100% certain. By my guess is forcing a full factory reset and then letting it rest after the ordeal, may have helped.
For the sake of documentation, and I have a Sure Signal 2 box, this is what I did:
1. Press & hold the reset button; wait until the status lights start to flash, at least 30 seconds
2. Whilst still holding the reset button, pull the power cable. Wait 10 seconds, then re-insert thye power cable
3. Release the reset button
4. Wait until lights have stablezied, and wait at least another 2 hours
And hey, it now works
27-06-2016 12:05 PM
@agdunkley We're glad to hear your Sure Signal is working now.
Thank you for keeping us updated.
06-09-2016 09:10 PM
06-09-2016 09:24 PM
Please can you resync Sure Signal serial number 42161753340
Many thanks
Steph
06-09-2016 09:52 PM
@tompoyntz wrote:
I upgraded my phone and had to have a new SIM card as a result. Now my Suresignal won't recognise my phone.
Have you removed the number and then added it again?
PWIAC