SureSignal v1 - can't connect

[NeilG1]

Sure Signal v1 not connecting with phone after power cut - rebooted x2, top 2 lights solid - no signal.

Occasional happened previously but this time, even after 2 x reboot attempts it still won't work.

[BandOfBrothers]

Hi @NeilG1

It may be worth trying a different power supply with the SureSignal (Version 1 & 2 ), as there have been some reports of replacement power supplies solving the issues. Even if lights / power are showing. They are available on eBay for around £10.

From member cineriv "But firstly, have a look around for a suitable unit with a 12 Volt output @ around 1.5Amp capacity that you could 'borrow' to prove the fault. Suitable units can be found on external hard drives, monitors, printers, routers etc.etc."

[NeilG1]

Thanks, I'll have a look around as I'm sure there is an appropriate supply here.

[John]

@NeilG1 Please take a look at our Sure Signal Troubleshooting thread, then post back your results if you’re not directed to an existing thread.