cancel
Showing results for 
Search instead for 
Did you mean: 
1

Ask

2

Reply

3

Solution

Version 3 (Power - flashing, Internet - solid orange, In Service - off, In Use - solid orange)

Retired-Lee
Moderator (Retired)
Moderator (Retired)

This thread has been created to discuss and troubleshoot the version 3 Sure Signal when the light sequence is as follows:

 

  • Power: Flashing
  • Internet: Solid Orange
  • In Service: Off
  • In Use: Solid Orange

 

Cause

 

This light sequence indicates the Sure Signal's not active and the cause is a network timing issue (NTP). These symptoms can be prone to recurrence.

 

Troubleshooting


Check that your Sure Signal has been registered successfully.
Before your Sure Signal can connect to our network, you must have first registered it with us. You will have received a message via text or email to let you know when the registration has completed successfully. Your Sure Signal will not work until you have recieved this confirmation message.

To verify that your Sure Signal has been registered, login to My Account, and click on the My Sure Signal tab. Your Sure Signal details should be listed, along with the status "Registered".

If you have not registered your Sure Signal, and are a Business Customer, please register at our Business Sure Signal page.


If you're a Consumer Customer, you can register directly from within the My Sure Signal page in My Account.


Manually configure your Router to allow port-forwarding.
In most cases, routers support a system called "Universal Plug-n-Play" or UPnP, which will setup port-forwarding for you automatically. If you have a complicated network setup, or a complex router, you may be required to enter these settings in manually.

The following details list the IP addresses and Port Numbers that need to be forwarded to your Sure Signal's internal IP address. For detailed instructions on how to do this, we recommend either contacting your ISP or Router Manufacturer, or referring to the Default Guide for your particular make and model, over at http://portforward.com

Destination IP Addresses:

  • 212.183.133.177
  • 212.183.133.178
  • 212.183.133.179
  • 212.183.133.181
  • 212.183.133.182
  • 212.183.131.128/26


Ports and Protocols:

  • 8 – TCP/UDP                 (All routers)
  • 50 – TCP/UDP               (All routers)
  • 53 – TCP/UDP               (Virgin Super Hubs)
  • 67 – UDP                      (Virgin Super Hubs)                                                    
  • 68 – UDP                      (Virgin Super Hubs)                                        
  • 123 – UDP                    (All routers)     
  • 500 – UDP                    (All routers)     
  • 1723 – TCP/UDP           (BT Home Hubs)          
  • 4500 – UDP                   (All routers)     
  • 33434 – 33445 – UDP    (Virgin Super Hubs)


Please note that in the above list of IP addresses, the notation "212.183.131.128/26" means the complete range of IP addresses between 212.183.131.128 and 212.183.131.191

Your Router will also need to be able to assign the Sure Signal with a DNS Server address via DHCP.

 

Check your MTU settings:

 

  1. Log into your admin page for your router
  2. Find the location of the MTU field - this varies depending on the make and model of router so you’ll need to hunt around for it
  3. Change the value of the MTU size to 1500 if this is allowed by your router

 

Log out of the router, this will usually result in a reboot:

 

  1. Hold in the reset button until all the lights go solid
  2. Pull the power lead out with the reset button still pushed in
  3. Continue to hold down the reset button and reconnect the power lead
  4. Wait for all of the lights to come on then release the reset button

The Sure Signal will now try to contact the network and download its profile. This may take anything up to 6 hours.


Post your Router details.
If you have successfully followed all of the above, or are struggling with configuring your Router, please post your Router's make and full model number below. It would also be helpful to include your Sure Signal Serial number and ISP (Internet Service Provider).

 

Quite often other users of the same router will be able to share tips with you around setup and any extra security settings that may need to be enabled/disabled to get things working correctly. Wherever possible, we will also attempt to assist you with this, however due to the vast number of different manufacturers and models, it is not always possible, and we do not officially support any form of Router Configuration. For that reason we will always recommend contacting your Router Manufacturer or ISP for assistance first.

 

Please provide your ISP with some information supporting the network performance issue such as a number of speedtests performed throughout the day and a trace route.

 

Traceroute command:

On a PC:

 

  1. Click on Start and select Run
  2. Type CMD into the Run box and press enter/click ok
  3. A black box will appear.
  4. In this box type tracert 212.183.133.177 press Enter
  5. Paste the output of this command into your reply.

 

On a Mac:

 

  1. Open Terminal (Applications, Utilities)
  2. Type 'traceroute 212.183.133.177'
  3. Press Enter


Thanks

LeeH

208 REPLIES 208


@LumenArchitect wrote:

Hi Guys

 

Tried everything written so far over the last 28 hours and keep coming back to flashing power, static internet and in use in orange with no In service light ever coming on.

 


I'm seeing exactly the same with my SS3 here. Flashing power, static internet and in use light, but no in service light. Tried reseting the SS a number of times which has made zero difference.

I'm also with Virgin Media.

 

Speed down/up: 200/12

ISP: Virgin Media

IP: 86.2.240.135

Serial: 42153622370

Trace route:

Tracing route to 212.183.133.177 over a maximum of 30 hops

1 1 ms 1 ms 1 ms router.asus.com [192.168.1.1]
2 * * * Request timed out.
3 12 ms 13 ms 11 ms glfd-core-2b-xe-012-0.network.virginmedia.net [80.0.1.245]
4 * * * Request timed out.
5 * * * Request timed out.
6 * * * Request timed out.
7 15 ms 15 ms 19 ms nrth-bb-1c-ae0-0.network.virginmedia.net [62.254.42.134]
8 31 ms 33 ms 38 ms fran-ic-2-ae0-0.network.virginmedia.net [62.254.42.178]
9 40 ms 43 ms 36 ms FFMGW3.arcor-ip.net [80.81.192.117]
10 33 ms 34 ms 33 ms 92.79.213.121
11 36 ms 34 ms 36 ms 92.79.213.158
12 34 ms 33 ms 36 ms 85.205.0.93
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.

Trace complete.

 

 

LumenArchitect
2: Seeker
2: Seeker
Thanks Wayne but after a few resets and restarts we are back to the same state.

Cheers

LA

Just wanted to add that mine is now back on, but that is only because I switched it over to my Sky Fibre connection. On the Virgin line it is still failing to connect with the same symptoms.

@LumenArchitect

 

Everything looks to be ok with your connection.

 

The next thing to do would be to try your Sure Signal on a different internet connection.

danproctor
2: Seeker
2: Seeker

I have this problem

 

Virgin Superhub 2

via

ASUS RT-AC66U router

 

tried with just upnp and all ports forwarded, neither way worked

have deregistered and tried a reset

Perhaps someone could help?

 

Thanks

@danproctor - Please take a look at our Sure Signal Troubleshooting thread. If this doesn’t resolve your query, please post your reply either below, or in the relevant thread, together with the details requested, including the following information.

  • Your speed test results from here.

  • Your ping test results from here.

  • Your external IP address from here.

  • The results of a traceroute.

  • Your Sure Signal serial number: 

     

VSS Traceroute command

On a PC:

  1. Click on Start and select Run

  2. Type CMD into the Run box and press enter/click ok

  3. A black box will appear.

  4. In this box type tracert 212.183.133.177 press Enter

  5. Paste the output of this command into your reply.


This will help us get the quickest possible resolution for you.

 

@LumenArchitect - Maybe ask a friend or family member if it's alright to try your Sure Signal on their connection?

Looks like my SSv3 is having the same/similar problems I had back in Nov 2015. May as well add my details to the list (again).

 

 

 

 

 

 

 

 

Great news! The information provided by Vodafone to Virginmedia appears to have done the trick!

 

My router updated remotely this morning and I now have a working Sure Signal 3 with crystal clear service.

 

Thanks for all the posts and support!

 

NOTE to ALL Virginmedia customers - get in touch with technical support and insist on a firmwarte upgrade, then reset your Superhub2 and it will automatically download the software for CISCO to allow P2P access to Vodafone servers!


@LumenArchitect wrote:

Great news! The information provided by Vodafone to Virginmedia appears to have done the trick!

 

My router updated remotely this morning and I now have a working Sure Signal 3 with crystal clear service.

 

Thanks for all the posts and support!

 

NOTE to ALL Virginmedia customers - get in touch with technical support and insist on a firmwarte upgrade, then reset your Superhub2 and it will automatically download the software for CISCO to allow P2P access to Vodafone servers!


And what about those of us using the Superhub in modem mode with another router?

A software update won't have been the actual fix for the issue because it is/has been a network level routing problem. Equally a magical software update doesn't explain why things were working fine until a week or so ago and have suddenly broken with any router or config changes.

My SS now "magically" works again, but no call to Virgin or Vodafone was made and the firmware on both the Superhub2 (modem mode) and my TP-Link router have not changed.  No idea on the SS.