Ask
Reply
Solution
27-11-2013 10:29 AM
I have just upgraded to a new iphone 5s and the sim was activated last night. However, I can't seem to get my new phone to be recognised by our sure signal. Serial number is 40132207214.
Please can you help me?
Thanks
27-11-2013 03:46 PM
Hi
Please take a look at our Sure Signal Troubleshooting thread. If this doesn’t resolve your query, please post your reply either below, or in the relevant thread, together with the details requested, including the following information.
Your speed test results from here.
Your ping test results from here.
Your external IP address from here.
The results of a traceroute.
Your Sure Signal serial number:
VSS Traceroute command
On a PC:
Click on Start and select Run
Type CMD into the Run box and press enter/click ok
A black box will appear.
In this box type tracert 212.183.133.177 press Enter
Paste the output of this command into your reply.
This will help us get the quickest possible resolution for you.
Thanks
Matt
Moderator
28-11-2013 01:44 PM
Hi efarrington.
I've performed a manual synchronisation for you so that your unit updates to the new SIM.
If you ever need to swap SIM cards with any of your phones in future, the quickest way to push a resync through is to de-register your Sure Signal entirely and then register it again from fresh.
Cheers, Ben
28-11-2013 02:51 PM
Copy of my post in for attention please
Hi,
I'm also having problems since upgrading to an I-phone 5s. Two other iphone 4s at home work perfectly. Broadband is BT infinity and old iphone 4s was working well before upgrade to 5s. Had the phone for 4 days.
So far I have:
Factory reset SS, Deregistered and re - registered, removed my number from the device, reentered it
All to no avail. Could you please resync device . The serial number for the device is: 21196821900
Thanks
29-11-2013 01:50 PM
29-11-2013 02:56 PM
I cross posted message and all working fine now after resync. Thanks