Ask
Reply
Solution
24-05-2013 09:34 PM - edited 24-05-2013 09:35 PM
Hi,
I have a VSS v3 which was working perfectly until today, when I asked to change my Vodafone phone number (and I also upgraded).
Since then, I have
- Power light (the vertical Red bar), is red and blinking
- The other 2 LEDs are Orange and steady.
I noticed in "my account", the message below (in the table).
Please note that I replaced the 5 last digits of my phone number by "x" but it shows my full NEW phone number.
Thnx for your help
24/05/2013 20:23:54 | 4478279xxxxx | 4478279xxxxx | My Account | 4478279xxxxx | New members were added to your Gateway. Users invalid |
Solved! Go to best answer.
06-06-2013 06:12 PM
I just got a solution from VirginMedia (thanks for nothing vodafone!!).
The solution is to put the firewall ON in the Superhub 2 and check the IpSecThrough option. It now works.
25-05-2013 02:25 PM
26-05-2013 07:41 PM - edited 26-05-2013 07:57 PM
hi
deregistered waited 24hrs, re registered, waited 4 hours, still not working! Now the red vertical bar is red and blinking and the other 2 leds are orange and steady
MODEL: Alcatel Lucent 9361 Home Cell p3.0
SERIAL: 40124127099
MAC: 0C4C3909C670
PART NUMBER: 3JR09113ABBA
Troubleshooting
Your speed test results from here.
--> 126MB Download, 11.6MB Upload
Your ping test results from here.
--> Ping 20ms, Jitter 2ms
Your external IP address from here.
--> Not displaying my IP in public, sorry. PM me if you need it.
Your Sure Signal serial number:
--> See above
The results of a traceroute.
-->
C:\Users\Tierix>tracert 212.183.133.177
Tracing route to cluster4.vap.vodafone.co.uk [212.183.133.177]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms routerlogin.net [192.168.0.1]
2 10 ms 9 ms 9 ms cpc13-bahd4-2-0-gw.14-2.cable.virginmedia.com [86.7.3.1]
3 10 ms 9 ms 15 ms renf-core-2a-ae4-3737.network.virginmedia.net [80.4.65.205]
4 12 ms 15 ms 14 ms manc-bb-1c-ae13-0.network.virginmedia.net [62.253.174.37]
5 138 ms 15 ms 16 ms brhm-bb-1b-et-400-0.network.virginmedia.net [62.253.175.69]
6 16 ms 16 ms 20 ms brhm-bb-1c-ae7-0.network.virginmedia.net [62.253.174.102]
7 20 ms 17 ms 21 ms tcl5-ic-2-ae0-0.network.virginmedia.net [212.250.15.210]
8 56 ms 22 ms 23 ms lndgw2.arcor-ip.net [195.66.224.124]
9 23 ms 21 ms 20 ms 85.205.116.10
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 * * * Request timed out.
From the SS history, I can see: (once again, I replaced the last 5 digits of my phone number with xxxxxx)
26/05/2013 13:38:49 | 4478279xxxxx | 4478279xxxxx | My Account | 4478279xxxxx, 4478279xxxxx | You registered your Gateway. |
27-05-2013 02:58 PM - edited 27-05-2013 03:01 PM
27-05-2013 03:24 PM
hi
how do I do that again?
Also, I also changed my router, I now have the latest VirginMedia router (SuperHub 2), so do I need to configure port forwarding again? If so, which ports? Again, can't find it on this forum. This info should be pinned as well as the device manual!!
28-05-2013 10:50 AM
Hi tierix,
If you have a new router then it is possible that you will need to forward the ports again.
You can see the ports you need here.
Also, to reset your Sure Signal just use these instructions.
For versions 1 and 2:
-Hold in the reset button until all lights go solid
-Pull the power lead out with the reset button still pushed in
-Continue to hold down the reset button and reconnect the power lead
-Wait for all lights to come on and then release the reset button
For version 3:
-Locate the button on the base of the box next to the Ethernet ports.
-Press and hold the button for approximately 30 seconds.
-Once the lights come back on, release the button.
The Sure Signal will be back online in around 1 hour.
James
28-05-2013 01:34 PM
Just tried everything as you said and same thing!
Power light blinking
Service light: orange, steady
In use light: orange and steady.
29-05-2013 10:22 AM - edited 29-05-2013 10:24 AM
Hi tierix,
Thanks for the update.
The light sequence you’re seeing shows that the Sure Signal is unable to be authenticated with our servers during the set up process.
Are you able to lower the security settings on your router to see if this makes a difference? I’d recommend rebooting your router once you’ve done this.
Your Sure Signal last connected to our servers on 24/5/13 at 03:08 so, to make sure your Sure Signal is as up to date as possible; I’ve just performed a resync for you. To make sure it completes, can you do a factory reset for me:-
If this isn’t successful for you, the next thing would be to try the Sure Signal in a different location (a family member, neighbour etc). If it works there, then there's something in your current set up that's preventing the Sure Signal from getting a stable connection to our servers.
Are you able to try a different router on your connection?
Let me know how you go on.
Thanks
Andrew
29-05-2013 12:33 PM
ok first, NO I'm not trying this to a friend's house, it's too inconvenient! If it doesn't work then send me a new one!
Plus, I haven't changed my setting, it stopped working after I asked Vodafone to change my phone number!
Second, I've ALREADY tried without the router, same thing, I've already reset the damn thing 3 times, I'm not doing it a fourth one. It obviously doesn't work!
30-05-2013 11:35 AM
Hi tierix,
Testing on a different internet connection is something we use to see if the Sure Signal is faulty if the basic checks don't fix things. I understand it's not the most convenient, but it just allows us to check the box on a completely different connection.
Everything appears to have changed, updated and re-registered normally, so I'd like to look a little deeper. Click here to get us your details and we'll be happy to take a closer look.
Dave