Fire stick doesn't connect to Giga Cube

[Effka]

I cannot connect my Giga Cube with Fire stick. It can see it, gets the correct password but the after authentication disconnects. Connected my laptop or phone without any problem, but don't know what shall I change in Giga Cube settings to make it work.

[Ash194]

Try setting a low channel count below  11 on your wifi settings. In the US anything above 11 is FCC banned so some American equipment such as fire sticks struggle on anything above that. Not a guarantee but worth a try.

[Effka]

Where do I set channels? 

[GemmaP]

Hey @Effka 

To change your channel, follow these instructions -

1. Enter http: //giga.cube or 168.8.1 in the address field of the internet browser.
2. Click on the GigaCube web interface > Settings > WLAN > Advanced WLAN settings.
3. 2.4GHz Wi-Fi: Use the pull-down menu next to Channel to change the receive channel. It is best to choose channel 6 or 11. These are overlap-free. Avoid channels 9 and 10 because microwaves operate at the same frequency

Let us know how you get on 😊

[Effka]

THANK YOU!!! Works!!! :))))