Ask
Reply
Solution
10-10-2013 03:56 PM
Installed a V3 Sure Signal yesterday. Red power light, white Internet and white In service lights all solid but I have no In use light illuminated.
Solved! Go to best answer.
11-10-2013 02:36 PM
Hi zx-2,
Thanks for that. Those details all look OK.
I can see that the Sure Signal connected yesterday just before your first post, so something has been getting through.
I've resynched the box, so can you reset it for me to pick that up?
For Sure Signal version 1 or 2:
For Sure Signal version 3:
Let us know if this helps.
Dave
02-11-2015 03:06 PM
Please take a look at our Sure Signal Troubleshooting thread. If this doesn’t resolve your query, please post your reply either below, or in the relevant thread, together with the details requested, including the following information.
Your speed test results from here.
Your ping test results from here.
Your external IP address from here.
The results of a traceroute.
Your Sure Signal serial number:
VSS Traceroute command
On a PC:
Click on Start and select Run
Type CMD into the Run box and press enter/click ok
A black box will appear.
In this box type tracert 212.183.133.177 press Enter
Paste the output of this command into your reply.
This will help us get the quickest possible resolution for you.
Thanks.
08-11-2015 09:36 PM
Installed a V3 Sure Signal two weeks ago. Red power light, white Internet and white In service lights all solid but I have no In use light illuminated.
Reset Sure Signal several times and been through trouble shooting guide.
Speed test results: Download 26.32 mbps, upload 6.60 mbps
Ping test: 31ms ping, Jitter 1ms
External IP address 88.97.102.93
Sure Signal Serial Number is 42150245480
Tracert results:
Traceroute has started…
traceroute to 212.183.133.177 (212.183.133.177), 64 hops max, 72 byte packets
1 192.168.1.1 (192.168.1.1) 1.923 ms 1.653 ms 1.693 ms
2 losubs.subs.dsl9.th-lon.zen.net.uk (62.3.84.53) 16.567 ms 16.759 ms 16.746 ms
3 ae1-126.cr2.th-lon.zen.net.uk (62.3.84.233) 17.131 ms 18.130 ms 17.395 ms
4 ldngw1.arcor-ip.net (195.66.224.209) 18.797 ms 22.408 ms 42.277 ms
5 85.205.0.93 (85.205.0.93) 18.268 ms 19.255 ms 19.104 ms
6 * * *
7 * * *
8 * * *
9 * * *
Stalls at 85.205.0.93
Any thoughts? The previous VSS3 was changed out due to a fault, so this is a new Sure Signal.
10-11-2015 03:49 PM
@clintonaskew All the information you’ve provided looks good and I can see the Sure Signal’s recently contacted the Network.
Please try the below reset:
14-11-2015 12:44 PM
Hi, followed the instructions. Only slight difference is that the VSS3 doesn't reboot whilst holding in the button, I had to release the button for it to reboot. But, I did as instructed and left the ethernet cable unplugged until the lights came on. In the event I had a flashing red power light and and stable orange connection light. Left it overnight to connect to no effect.
I then rebooted with the ethernet connected and got the same result.
Eventually rebooting and reconnecting the ethernet as soon as the VSS3 had rebooted seemed to work. Finally success.
19-11-2015 12:49 PM
@clintonaskew We're glad to hear this has been sorted.
Have a nice day.